This light bulb is for microwaves.
Light bulb illuminates the surface below the microwave or the interior of the microwave.
Because high-voltage capacitors in a microwave can retain a lethal e...
Sold individually. Product Description Charcoal air filter works with some Frigidaire, Electrolux, White Westinghouse, and Tappan models of microwaves. This is a genuine OEM part that works for some m...
Sold individually. This grease filter is for microwaves.
Grease filter traps grease from the exhaust air.
Follow the instructions in the owner's manual when installing this part.
$89.32
In Stock
Questions And Answers for FGMV175QBA
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
BOBBY
May 6, 2023
CLOCK DOES NOT WORK AL NUMBERS WORK
For model number FGMV175QBA
Hi Bobby, thank you for reaching out. Based on the description that you have provided, we would recommend checking the electronic control board, part number PS11766411. We hope this solves your problem!
Hi Linda, thank you for reaching out. If the door handle is broken, you may need to replace it. The part number is PS3491309. We hope this information helps!
Came home and heard a sound from my microwave. The tray was turning with the microwave off. When opening the door it would stop. Had to unplug to make it stop. Help
For model number FGMV175QBA
Hi Earl, thank you for your question. We have researched the model and would recommend checking the control board, part number PS11766411. A faulty control board might not be sending the correct shut-off signals, causing the tray to turn continuously. We would suggest checking the control board for continuity using a multimeter. Good luck with the repair!
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
First thing I dir was search YouTube for any related videos and found this one https://www.youtube.com/watch?v=uHj4H9Fdxrc, it was the exact problem my microwave was exhibiting. Once I verified the problem by troubleshooting, I removed the part and verified that the switches were working fine, the door latch assembly showed signs of wear which was the cause of the problem. After receiving the replacement part I installed it, verified that power was restored to the unit and reassembled the microwave, works fine, hope it lasts a long time!