The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or c...
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Randy
December 7, 2019
Does the turn table roller guide self attach to the motor when you place the guide over the hole? Or is there a piece that sticks up from the hole which attaches to the roller guide?The above model number is what is on the microwave. however, when looking it up the “y” is not part of the number found.
For model number FGMO205KFC
Hi Randy, there is just motor PS979515, bush PS2343052 and guide PS2343051. There are no additional pieces that are a part of the process. Installing should be simple. Thank you for your question and good luck with your repair!
I want to replace the door open lever, but after removing the trim piece, it isn't obvious how to get the control panel off - no screws...does it just slide or pop off. Not anxious to ruin the microwave for an inexpensive repair.
For model number FGMO205KFC
Hi Steven, thank you for asking. We have found that first, you may have to remove the top cover of the microwave. Then, you may need to unthread the screw securing the control panel. The screw can be found on the top back of the control panel. After removing the screw, unclip the wires, open the door, and pull the control panel out. We hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Melissa
September 21, 2023
Sometimes when I shut microwave door, it starts working as if I pushed to start. Other times I’m the middle of a cycle, it turns off before timer..without beeping. This has been going on for 6 mos. 4yr old microwave and home. We pulled it out and everything is in working condition. Help
For model number FGMO205KFC
Hi Melissa, thank you for reaching out. Based on our research, the issue is probably with the door switch. We recommend you replace it. There are two door switches in your model. The part numbers for the door switches are PS8769124, and PS3409702. Check both the parts and replace the faulty one. We hope this solves your problem.
My microwave turns on, the table spins, and the light turns on, but the unit won’t heat up. What is most likely the issue?
For model number FGMO205KFC
Hello Jeremy, thank you for your query. The issue seems to be most likely in the magnetron, part number PS12728994. If this does not fix the issue, we recommend checking the thermal fuse, part number PS466969, or the control panel, part number PS2369253. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
My microwave it’s not heating, and make a funny noice, it is not the magnetron what else could be the problem?
For model number FGMO205KFC
Hi John, thank you for reaching out. If your microwave is not heating, we suggest that you check the door switch, part number PS8769124, thermal fuse, part number PS466969, transformer, part number PS3419848, and the control board, part number PS11770659. If you need help placing an order, please feel free to give us a call. We look forward to hearing from you!
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
Removed the 3 screws to drop the lower panel and, removeed the turn table plate and ring. Then removed the 2 screws holding the motor, the 2 wires attached to the motor and removed the old motor.Replaced the new motor in the reverse order. DO NOT FORGET TO UNPLUG THE MICROWAVE FIRST.
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a 12 volt battery and it was bad. Ordered a new one from Part select and got it fast . Works great .