FGID2479SD3A Frigidaire Dishwasher - Overview
Sections of the FGID2479SD3A
[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Wash Arm Bearing
PartSelect #: PS9492561
Manufacturer #: 807035801
This part is the replacement wash arm bearing for your dishwasher. It is made of black plastic and is approximately 1 1/4 inches in diameter. The wash arm bearing allows the wash arm to rotate when th...
$41.81
In Stock
Control Arm
PartSelect #: PS12731363
Manufacturer #: 111920868
This is an authentic lower spray arm, which works with dishwashers.
$80.55
In Stock
Dishwasher Switch
PartSelect #: PS12586275
Manufacturer #: A00055408
This dishwasher water-level pressure switch is designed to monitor and control the amount of water inside the tub, helping ensure proper fill levels for effective cleaning while preventing overfilling...
$101.00
In Stock
HOSE
PartSelect #: PS9492560
Manufacturer #: 807032601
This dishwasher drain hose helps carry dirty water out of your dishwasher and into the sink drain. It’s a sturdy, reliable part that fits many models from Frigidaire and related brands. If your old ho...
$62.10
In Stock
VALVE
PartSelect #: PS16555914
Manufacturer #: 807445905
This water inlet valve controls the flow of water into the dishwasher, ensuring proper filling for each cycle. A faulty valve can cause issues such as the dishwasher not filling correctly or leaking. ...
$114.45
In Stock
SEAL
PartSelect #: PS9492299
Manufacturer #: 117158011
This dishwasher door seal gasket creates a watertight barrier around the tub opening, helping keep water contained during wash cycles. Made from durable, flexible material, it ensures a tight seal for...
$65.95
In Stock
MOUNTING KIT
PartSelect #: PS11703769
Manufacturer #: 405531515
This genuine OEM dishwasher mounting hardware kit includes the essential brackets, fasteners, and screws needed to securely anchor a built-in dishwasher to the surrounding cabinetry or countertop. Des...
$108.79
In Stock
CLIP
PartSelect #: PS9494150
Manufacturer #: 807282902
This genuine OEM clip from Frigidaire is a quintessential part for your appliance repairs. This particular piece is a tine row retainer for dishwashers, responsible for attaching the tine row to the d...
$79.12
In Stock
Dishwasher Drain Pump
PartSelect #: PS9492626
Manufacturer #: A00044305
This dishwasher drain pump assembly removes water from the tub during the drain cycle, helping ensure efficient operation and thorough cleaning. Built with a durable motor design, it supports reliable...
$197.50
In Stock
Common Symptoms of the FGID2479SD3A
[Viewing 6 of 6]Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dishwasher would not start
Watched a video on you tube and did the repair myself. Very easy. Repairman wanted two hundred to do the repair.If i ever need another part for any appliance i will order the part from you and do it myself. Thank you.
Parts Used:
-
Danny from BEECHER, IL
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control panel defective
Removed the front door panel of the dishwasher by removing screws on the back side of the front door panel. (Keep track of the screw placements as they vary in size) Remove the screws holding the control panel in place. Unplug the control panel connector and remove the defective panel. Reconnect the new control panel and reverse the process for reassembly. (Caution with the door panel and frame may have sharp edges).
Parts Used:
-
Berry, from Prosper, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rack stop was broken and rack kept falling out
-
Steve from MERRICK, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
5 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!