This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing wate...
$47.19
In Stock
Order within the next 7 hrs and your part ships today!
The upper spray arm helps distribute water from the top of the dishwasher tub.This spray arm is a genuine OEM replacement part for your dishwasher. This spray arm is for the upper part of your dishwas...
$46.08
In Stock
Order within the next 7 hrs and your part ships today!
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, o...
$8.76
In Stock
Order within the next 7 hrs and your part ships today!
The spray arm rotates and sprays water to clean the dishes inside the dishwasher tub.
This part works with the following brands: Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Sears, ...
$81.89
In Stock
Order within the next 7 hrs and your part ships today!
This door seal is for dishwashers.
Door seal seals the gap between the opening to the dishwasher tub and the outer edge of the door.
After installing the door seal, shut the dishwasher door and ...
$41.19
In Stock
Order within the next 7 hrs and your part ships today!
This door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.
$56.55
In Stock
Order within the next 7 hrs and your part ships today!
Questions And Answers for FGID2466QD0A
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul Hilton
November 28, 2019
Problem: Dishwasher does not completed cycle, stops and all lights comes on...stops after pumping out water, won't circulate and wash. a rinse cycle will fills with water, but stops before going beyond the water fill. will drain all water, but will not begin a wash cycle. does this seem to be a computer problem? (have powered down dishwasher with circuit breaker, but does not solve problem). i have went thru the "before you call" section" page, and as to section "normal sounds you should hears", when it gets to water spay, then is pauses and about 1 minute later the display lights all come on and cycle stops". on page " care and cleaning", have done all the procedure to empty glass trap and clean, by remove and reassembled all of the spray arm and screen. after, still same problem will not go into the wash cycle. thanks fro you help.
For model number FGID2466QD0A
Hi Paul, as best we can tell it is a faulty control board. Thank you for your question and good luck with your repair!
The rinse aid cap fell out while the dishwasher was running ad melted one side. I can't fine the replacement part
For model number FGID2466QD0A
Hi Marylois,
Thank you for your question. Unfortunately the cap is not sold separately and you will need to purchase the detergent dispenser to get it. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
Jeremy
November 11, 2021
The lower wash arm is not moving or spinning and is really loose, I didn’t know if I just need a new wash arm or do I need other parts besides that?
For model number FGID2466QD0A
Hello Jeremy, Thank you for the question. We suggest replacing the Lower Spray Arm and the Support. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Repair was simple. I unscrewed the old grommet which held the old spray arm and screwed-on the new one. About 30 seconds was required. Other people having this problem should note that the spray-arm is made of three pieces which are inseparable when the arm is new. The arm is sold in this form. However, when your machine is having the problem that the arm falls off, the three pieces become separate. When you want to replace the spray arm, only one new part needs to be ordered because this part encompases all three components.
I removed old tub gasket, which the door presses against to make a seal, and put the new one in. Flat tip screwdriver was used to gently press gasket in.
