This part is a replacement wheel assembly for your lower dishrack. The wheels on the dishrack allow it to roll in and out of the dishwasher efficiently. If one of your wheels is broken or warped, you ...
$31.46
In Stock
Order within the next 6 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carol
February 24, 2020
Need to replace top rack with middle arm spray. Cost? Is there an authorized dealer in long beach, ca area?
For model number FGHD2455LB0
Hello and thank you for writing.
Regretfully both parts have been discontinued for your model and are no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute or if there is an authorized dealer in your area. Here is the manufacturer's phone number: Frigidaire US Transfer 800-374-4432
We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Paul
November 30, 2022
I get an error message on the display and it won’t start. This is a Frigidaire dishwasher.
For model number FGHD2455LB0
Hello Paul, thank you for reaching out. If your Frigidaire dishwasher is not starting, we suggest that you check the following parts: the door latch, part number PS2379415, door spring and cable assembly, part number PS16620843, user interface board, part number PS3419925, and the control board. If you require assistance to place an order, please contact customer service. We hope that helps!
Disconnect from power Unscrewed 4 phillips screws from top of outer door. Unscrewed 2 screws each siide of door. Lower outer door section drops away. Note wiring sequence on dispenser, then disconnect wires. Unscrew 6 screws on dispenser and lift dispenser out.
Place new dispenser in place (note orientation), ann fasten in place with screws, remembering to replace wire retainer on left lower screw. Reconnect wires to dispenser correctly. Slide lower outer door over tabs and secure with the 4 side screws. Ensure lower door is up under control panel and secure with the 4 top screws.
Fill dispenser with detergent, reconnect power and test run while enjoying a cup of tea in celebration of a job well done..
