This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing wate...
This dishwasher water inlet valve is a genuine OEM component designed to regulate water flow into the appliance during the fill cycle. Typically located behind the lower kickplate panel in either fron...
The upper spray arm helps distribute water from the top of the dishwasher tub.This spray arm is a genuine OEM replacement part for your dishwasher. This spray arm is for the upper part of your dishwas...
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, o...
This part is a replacement spray arm support for your dishwasher. It is made of white plastic and is approximately 3 inches long, 1 inch wide, and 3 inches tall. This is the support for the lower spra...
If your dishwasher won’t start or the door won’t close properly, the latch assembly might need replacing. This part helps keep the door securely shut and includes a switch that stops the dishwasher fr...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Duane
January 18, 2020
What do i have to do to replace the water delivery tube grommet
For model number FGHD2433KB1
Hello and thank you for writing.
You would just push this part into place. Sometimes it helps to lubricate (soap) the grommet around the circumference to help push it into place. We hope this helps. Please contact us anytime if you require further assistance.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Gary
March 9, 2024
DISHWASHER NOT DRAINING
For model number FGHD2433KB1
Hello Gary, thank you for reaching out. According to our understanding, we would recommend checking the drain hose for any obstructions or blockage. If it is fine, then the issue is most probably with the drain pump, part number PS8689824. You may need to replace it to solve the problem. Glad to be of assistance!
How long would it take to get a new stainless cover for the dishwasher?
For model number FGHD2433KB1
Hi Robert,
Thank you for your question. If you are looking to replace the stainless steel door, the door is currently not in stock and it is on special order for 10-15 business. The current costs for our shipping fees and time frames are listed below:
Economy (Usually 3-7 Business Days - may go to 10 business days), US Postal Service - $7.45,
Standard (Usually 2-3 Business Days - may go to 3-5 business days), UPS or FedEx - $9.95,
Next Business Day, UPS or FedEx - $24.95. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Repair was simple. I unscrewed the old grommet which held the old spray arm and screwed-on the new one. About 30 seconds was required. Other people having this problem should note that the spray-arm is made of three pieces which are inseparable when the arm is new. The arm is sold in this form. However, when your machine is having the problem that the arm falls off, the three pieces become separate. When you want to replace the spray arm, only one new part needs to be ordered because this part encompases all three components.
Remove the bottom cover plate. Disconnect the water inlet and black rubber hose. Remove 2 mounting screws. Pull out electrical connector. Reverse order. Be sure to get the brass inlet connector really tight so it won't leak. I did the final tightning after the part is mounted. Not a bad repair at all. The only problem was that it leaked in the first place and messed up my subfloor and laminate flooring.
