This manufacturer-approved air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important ...
This genuine PureSource Ultra water filter will fit most Frigidaire french door and side by side refrigerators. You will find this filter located in the back, top right of the appliance. It is white i...
This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
This part contains molded glide rails for the crisper pan. It does not come with the glass shelving. The glass is not included. Must be ordered separately.
This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity c...
This kit includes the ice maker, power cord, bail arm, and fill cup. If your ice maker is not making or dispensing ice, or you notice a leak, you may need to replace the rear-mount ice maker assembly....
This is a replacement crisper glass insert for your refrigerator. It fits into the crisper pan frame and acts as the top of the crisper pan, as well as a shelf for food storage. Because it is made of ...
$135.03
In Stock
Questions And Answers for FGHC2331PFAA
Ask our experts a question about this model and we'll get back to you as soon as possible!
27 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
HARLEY
December 10, 2021
Replacing power cord is the Green wire with yellow strip just a ground wire
For model number FGHC2331PFAA
Hi Harley,
Thank you for your question. Yes, the green wire in the power cord is the ground wire. We hope this helps! If you have any questions, please let us know.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Mitch
December 12, 2019
My ice maker is making ice, but not delivering it through the door. Do i need a new ice maker to fix it?
For model number FGHC2331PFAA
Hello Mitch, thank you for inquiring. This is likely due to a faulty Ice Solenoid, part number PS8691995 for your model. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Eric
December 2, 2019
Do you have the tabs that hold the shelves?
For model number FGHC2331PFAA
Hello Eric and thanks for writing.
We would need to know which tabs you need for which shelf exactly as they are different for certain shelves. For example, the crisper shelf has a clip part # PS1146693. Please reply and always include the model number. We hope this helps. Please contact us anytime.
Hi Larry, thank you for reaching out. According to our research, the SY CE error refers to the main control board communication error. We recommend checking the main control board, part number PS10064907. We hope this solves your problem!
I have water to ice maker & no water to the water dispenser
For model number FGHC2331PFAA
Hello William, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the water filter, the water inlet valve, and the water tubes. You can check both solenoids on the water inlet valve with a multimeter. Good luck with your repair.
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers.
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle. A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if the maker dumped the ice into the bin.