This OEM refrigerator filter is for french door and side-by-side door types and is located in the back, top-right of your appliance. By absorbing heavy metals, pharmaceuticals, pesticides, chlorine, a...
$105.06
In Stock
Order within the next 12 hrs and your part ships today!
This is a genuine Frigidaire part for your refrigerator. This is an ice maker, which connects to the water lines to provide fresh ice. The most common reason to replace this part is if your refrigerat...
$145.77
In Stock
Order within the next 12 hrs and your part ships today!
This crisper drawer cover assembly is for refrigerators.
The crisper drawer cover assembly includes the crisper drawer cover frame and the insert that covers the drawer. The assembly may include mu...
$167.22
In Stock
Order within the next 12 hrs and your part ships today!
This door gasket is for the freezer door on the refrigerator. The gasket is grey in color. This part is approximately 34-1/2" wide x 24" long. The door gasket is on the inner door panel and creates a ...
$204.03
In Stock
Order within the next 12 hrs and your part ships today!
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
$27.52
In Stock
Order within the next 12 hrs and your part ships today!
Questions And Answers for FGHB2868TF5
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
MILTON
March 28, 2023
Ice dispenser is working. The water is being dispensed too. However, the water is not coming out cold. It's basically dispensed at room temperature.
Please advise what may be wrong.
For model number FGHB2868TF5
Hi Milton, thank you for reaching out. We have researched the model and would recommend checking the water tubing, part number PS3633272, and the inlet valve, part number PS7321353, for any blockings. If the dispenser is not getting enough water in the tank, it will not be having enough time to cool it. If the issue remains, the problem might be with the dispenser module, part number PS12071009. We hope this helps!
my Frigdaire GALERY Refrigerator has a code on the door panel - SY EF
The manufacturer tellsme it stands for - evaporator fan. What is the part number for this part?
For model number FGHB2868TF5
Hello Avery, thank you for your inquiry. The error codes SY or EF indicate there is a problem with your evaporator fan. Unplug the refrigerator from the power source for a few minutes. This step can reset the control board, which can sometimes resolve the issue. If this does not solve the issue, the evaporator fan motor needs to be free from blockages in order to be functioning well and cooling the freezer to appropriate levels. If the fan blades are blocked by some material, then the fan will not rotate. When you notice a buildup on the fan blades, clean them. Make sure that there are no leakages to prevent this problem in the future. When there is a buildup of ice on the evaporator fan, shutting down the refrigerator for a while also helps as the ice melts in that time. Also, check the wiring and connections between the control board and the evaporator fan. Ensure that all connections are secure and there are no loose or damaged wires. If the wiring and connections are intact, the issue may be with the evaporator fan or the control board. Test the voltage with your multi-meter and determine which component is causing the issue. If the issue is with the evaporator fan, you can replace the fan motor, part number PS11775846. We hope this sorts out your problem!
First I pulled the ice tray out so I could see the solenoid housing/ice tray support(1 unit). Below the ice tray there are 2 screws that hold the solenoid housing/ice tray support. After removing those the assembly lifts up so you can see the wiring harness to disconnect. I pulled it out and removed the 2 screws to open it up. There is 2 screws holding the solenoid in place and one ground wire. This was an easy fix and I know I saved a lot of money.
Simple three steps... 1) There's an front section to the ice-maker to take off. One Phillips screw is on the side, one screw is underneath near the inside of the refrigerator wall. Just unscrew and store. 2) There's a small plastic unit just inside the ice maker to take out. It's held in by a small nut that requires about a 4" extension to reach. (You may be able to unscrew the nut with small needle-nose pliers). Just unscrew and take out the unit - the unit functions just to keep the ice maker wiring in place. 3) The wiring looks a mess, but there's just one wiring connector to the ice maker assembly. Unsnap it. The ice maker is not screwed in, it just slides in -- reach in and pull the assembly straight out; when it stops, lower it a bit and it will come free. Reverse the instructions to install the new unit.
I checked the dampener, it worked. The compressor and fan worked. I knew because my freezer was still hovering around 10 degrees. Coils were clean. Thermistor was the only thing it could be. Took all my shelves out. Removed four screws. Took the back panel off. The thermistor sits tucked in on the side. I piped it out, in clipped it. Used my multimeter to test the numbers. Numbers were off just a bit. Ordered the part. Crossed my fingers.,took less then 5 minutes to put the part in. Plugged in the fridge. It was sitting at 33 degrees in about an hour and a half. I can’t believe I fixed it. I knew NOTHING about refrigerators. For how big my fridge is, it would have cost 3,000 and up to get a new one with the same cu ft size. Instead, it cost me $44. That includes shipping. Thank you Parts Select!! Made it so easy to pick the correct part for my model fridge!