This part has been replaced by the manufacture. It may differ in appearance but will still function the same.
$176.51
In Stock
Questions And Answers for FGEF304DKFC
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lorraine
January 19, 2020
I had no problem with the stove since purchase til this morning. The left front burner will not shut off. Turning the knob has no effect. I had a large pot of broth on #2 which is simmer. It was on overnight with a lot of broth in. By 7:00 am the pot was burnt and no broth was left in the pot. I tried to turn off the burner. It would not turn off. We unplugged the stove, turned off the breaker and waited a while. We turned on the breaker, plugged the stove back in and the burner again turned on while the knob was in the off position and we could not shut it off. My husband disconnected the termination points on that left front burner. The other burners and the ovens are all working fine. What could the problem be? It seems like the burner switch went bad. What could have happened? Thank you.
For model number FGEF304DKFC
Hello and thank you for writing.
It certainly sounds like it could be a faulty control assembly PS2373701, you should check for signs of damage, and replace as necessary. In this unit, the switch can not be changed individually as it only comes as part of this unit. We hope this helps. Please contact us anytime if you require further assistance.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the different sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
Repair was quite easy, as long as you have the instructions for removing the door. The screws that hold the bottom of the door to the fixed hinge are placed into the side of the hinge assembly after removal; this holds the door at a 45 degree angle for easy removal. After that, just place the door on a flat surface and dismantle the door from the inside. The inner glass is contained in a metal frame with another piece of glass; this frame comes apart easily using the clips in each side. The door assembles easily after the glass is replaced; just take your time and give yourself enough room to lay out the parts as you go. Good luck!