This OEM refrigerator filter is for french door and side-by-side door types and is located in the back, top-right of your appliance. By absorbing heavy metals, pharmaceuticals, pesticides, chlorine, a...
$105.06
In Stock
Order within the next 4 hrs and your part ships today!
This is a genuine Frigidaire part for your refrigerator. This is an ice maker, which connects to the water lines to provide fresh ice. The most common reason to replace this part is if your refrigerat...
$145.77
In Stock
Order within the next 4 hrs and your part ships today!
Order within the next 4 hrs and your part ships today!
Questions And Answers for FG4H2272UF
Ask our experts a question about this model and we'll get back to you as soon as possible!
34 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
May 1, 2023
"power outage" keeps showing , even after 1/2 hou unplug to try resetting...ALSO the full screen "Diagnostic screen light up" comes on every time opening left French door on fridge(Inside light also times out and shuts off" while open then that diagnostic screen shows up!!!
For model number FG4H2272UF
Hi Jim, thank you for reaching out. Based on our understanding of the issue, we would suggest you check the main control board, part number PS16731633, as it is the most likely cause of this issue. If it is faulty, you may need to replace it. We hope this solves your problem!
We can't reset temperature on refrigerator or freezer.
For model number FG4H2272UF
Hello Sam, thank you for the question. According to our research, the unit should stabilize temperatures within 24 hours. If the issue still persists, you may need to replace the control board, part number PS16555520, to fix the issue. We hope this helps!
I bought a new fridge (fg4h2272uf) on nov 6, 2020. It’s just coming up on 9 months and already the lights inside the custom Flex temp drawer stopped working. I hate the thought of purchasing a replacement led board when the fridge is still so new. What are your recommendations to address this issue? Thank you in advance, pj
For model number FG4H2272UF
Hi PJ,
Thank you for your question. If your refrigerator is recently new, you are likely still under warranty for it and you will need to contact Frigidaire for a replacement part. If they are unable to help you, you may contact us back and we would be happy to order the part for you. If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tim
February 4, 2023
My ice maker on-off switch won’t stay on light goes off not making ice
For model number FG4H2272UF
Hello Tim, thank you for reaching out. First, we recommend checking if the plug is properly inserted into the socket and testing the electricity. After that, you need to replace the switch, part number PS12746436. We hope that helps!
My fridge keeps getting a code H1. We changed the thermsister in the freezer. It also is adjusting temperature all the time, sometimes it is hard to change from water to cubed ice and it every once in awhile it beeps.
For model number FG4H2272UF
Hi Grant, thank you for the question. The H1 error code means that the freezer sensor has shorted. If you have replaced the sensor but the problem still exists, along with the other issues mentioned, you may need to check the electronic control board, part number PS16555520, as it is most likely faulty and may need to be replaced. We hope this helps!
Simple three steps... 1) There's an front section to the ice-maker to take off. One Phillips screw is on the side, one screw is underneath near the inside of the refrigerator wall. Just unscrew and store. 2) There's a small plastic unit just inside the ice maker to take out. It's held in by a small nut that requires about a 4" extension to reach. (You may be able to unscrew the nut with small needle-nose pliers). Just unscrew and take out the unit - the unit functions just to keep the ice maker wiring in place. 3) The wiring looks a mess, but there's just one wiring connector to the ice maker assembly. Unsnap it. The ice maker is not screwed in, it just slides in -- reach in and pull the assembly straight out; when it stops, lower it a bit and it will come free. Reverse the instructions to install the new unit.
When removing existing filter you will experience some resistance at the 10-4 position which requires a little extra pressure to reach the 9-3 position.
REPLACED WITH NEW. HOWEVER, THE WATER FILTER INDICATOR STILL SAYS 'REPLACE'. THERE IS NO LEAKAGE, BUT IT APPEARS LIKE THE NEW CARTRIDGE IS NOT COMPLETELY INSERTED. I'VE TRIED REMOVING AND REPLACING THE NEW CARTRIDGE SEVERAL TIMES, BUT IT STILL SAYS 'REPLACE'. INCIDENTALLY, THIS WAS THE SECOND ORDER OF THE CARTRIDGE AND LAST TIME I GOT TWO, AND THEY BOTH FIT FINE! WITH THIS ORDER I GOT JUST ONE.
