Models > FFTW4120SW0

FFTW4120SW0 Frigidaire Washer - Overview

Sections of the FFTW4120SW0

[Viewing 3 of 3]
Cabinet/top Diagram and Parts List for Frigidaire Washer
Cabinet/top
Control panel Diagram and Parts List for Frigidaire Washer
Control panel
Motor/tub Diagram and Parts List for Frigidaire Washer
Motor/tub
Keep searches simple, eg. "belt" or "pump".
SUSPENSION – Part Number: 5304511328
SUSPENSION
★★★★★
★★★★★
(1)
PartSelect #: PS12176452
Manufacturer #: 5304511328
$58.90
  In Stock
SUSPENSION – Part Number: 5304511329
SUSPENSION
PartSelect #: PS12176453
Manufacturer #: 5304511329
$58.90
  In Stock
PUMP – Part Number: 5304511363
PUMP
★★★★★
★★★★★
(2)
PartSelect #: PS12176487
Manufacturer #: 5304511363
$257.26
  In Stock
LOCK ASSEMBY – Part Number: 5304511338
LOCK ASSEMBY
PartSelect #: PS12176462
Manufacturer #: 5304511338
$119.16
  On Order
DRAIN HOSE – Part Number: 5304516129
DRAIN HOSE
PartSelect #: PS12585159
Manufacturer #: 5304516129
$72.80
  In Stock
VALVE – Part Number: 5304511334
VALVE
PartSelect #: PS12176458
Manufacturer #: 5304511334
$185.90
  In Stock
SWITCH – Part Number: 5304511344
SWITCH
PartSelect #: PS12176468
Manufacturer #: 5304511344
$76.57
  In Stock
MOTOR – Part Number: 5304511356
MOTOR
PartSelect #: PS12176480
Manufacturer #: 5304511356
$370.58
  In Stock
BOARD – Part Number: 5304511367
BOARD
PartSelect #: PS12176491
Manufacturer #: 5304511367
$317.05
  In Stock
SENSOR ASSEMBLY – Part Number: 5304511335
SENSOR ASSEMBLY
PartSelect #: PS12176459
Manufacturer #: 5304511335
$69.73
  In Stock
AGITATOR – Part Number: 5304511349
AGITATOR
PartSelect #: PS12176473
Manufacturer #: 5304511349
$162.87
  In Stock
CLUTCH BODY – Part Number: 5304511362
CLUTCH BODY
PartSelect #: PS12176486
Manufacturer #: 5304511362
$423.51
  In Stock
Back to Top
View More

Questions And Answers for FFTW4120SW0

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the FFTW4120SW0

[Viewing 1 of 1]
Will not drain
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The tub was bouncing around everywhere, the suspension rod wasn’t actually the problem but that had nothing to do with the part
Unscrewed the top of the washer after disconnecting the hoses. Tipped the matching on its back. Places a 2x4 underneath the tub to release the tension on the rods, then just popped the old one out and put the new one in. Tipped the machine back up and reconnected everything.
Parts Used:
SUSPENSION
  • Sean from MILWAUKEE, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More