This manufacturer-approved air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important ...
$40.49
In Stock
Order within the next 5 hrs and your part ships today!
This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
$15.15
In Stock
Order within the next 5 hrs and your part ships today!
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
$16.83
In Stock
Order within the next 5 hrs and your part ships today!
This OEM refrigerator filter is for french door and side-by-side door types and is located in the back, top-right of your appliance. By absorbing heavy metals, pharmaceuticals, pesticides, chlorine, a...
$105.06
In Stock
Order within the next 5 hrs and your part ships today!
This cover holds up the top crisper drawer, and has drawer glides molded in it. This upper crisper drawer cover is a manufacturer-approved replacement part for your refrigerator. It has drawer glides ...
$112.56
In Stock
Order within the next 5 hrs and your part ships today!
This is a genuine Frigidaire part for your refrigerator. This is an ice maker, which connects to the water lines to provide fresh ice. The most common reason to replace this part is if your refrigerat...
$145.77
In Stock
Order within the next 5 hrs and your part ships today!
This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity c...
$175.44
In Stock
Order within the next 5 hrs and your part ships today!
This part contains molded glide rails for the crisper pan. It does not come with the glass shelving. The glass is not included. Must be ordered separately.
$102.60
In Stock
Order within the next 5 hrs and your part ships today!
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
$27.52
In Stock
Order within the next 5 hrs and your part ships today!
Questions And Answers for FFSC2323TS8
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Susan
January 24, 2023
my ice maker will not dispense cubed ice
For model number FFSC2323TS8
Hi Susan,
Thank you for your question. If you are switching from crushed to cubed ice, it is normal to get a small amount of crushed ice at first. When you switch to cubed ice, a lever behind the ice bucket opens a flap to allow cubed ice to be dispensed. If an ice cube gets caught behind the ice bucket, it can prevent the lever from working. You will need to remove the ice bucket and remove any ice that may have fallen behind it. If there are no ice cubes behind the bucket, try dispensing ice with the bucket removed. Shut the refrigerator door and press the ice dispenser. You are doing this to see if you hear a loud snapping noise. If there is no snapping noise, service will be needed. If you hear a snapping noise, reinsert the bucket and try cubed ice again. If cubed ice is not dispensed, then check the ice bucket to see if the ice in it has frozen together. If it has frozen together, dump it out and clean the bucket. Reinsert the bucket and try the dispenser again. We hope this helps with the repair!
Was this helpful?
Thank you for voting!
Andrianna
July 7, 2023
I need to replace a clear refridgerator door bin.
For model number FFSC2323TS8
Hi Andrianna, thank you for reaching out. Your refrigerator comes with two types of clear door bins. The part number for the two bins under the dairy compartment is PS976745. Whereas, the part number for the lower clear bin is PS976749. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you!
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers.
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle. A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if the maker dumped the ice into the bin.