This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
This door bin holds items on the door of your refrigerator. They are sometimes called Cantilever Shelves as they attach to the refrigerator door by the back of the shelf. This part is sold individually.
This NSF-Certified OEM filter is white in color with a plastic housing and extruded carbon filter media. It measures 2.3-Inches deep, 9.1-Inches high and 2.3-Inches wide. It fits certain Frigidaire si...
This cover holds up the top crisper drawer, and has drawer glides molded in it. This upper crisper drawer cover is a manufacturer-approved replacement part for your refrigerator. It has drawer glides ...
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide....
This OEM white door bin is made of white plastic and is easy to install. It is used to hold items in the fridge, and you'll be able to visually see if the part is broken. This part attaches to the fri...
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The run capacitor is attached to the compressor. This part is 120 volts a...
$66.01
In Stock
Questions And Answers for FFHS2611PFEA
Ask our experts a question about this model and we'll get back to you as soon as possible!
15 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Laurence
August 25, 2021
Ice forming on rear interior of freezer cabinet, then melts on to floor. Help!
For model number FFHS2611PFEA
Hello Laurence, thank you for the question. This could be caused by a dislodged Water Supply Tube to the Ice Maker creating a spill over and leaking. If the Tube is good, check the Ice maker Tray for cracks or damage that may cause a leak. If they check out good, watch the Ice maker during the fill cycle to see if it is over filling and spilling over. If so, the Water Valve may need to be replaced. We hope this helps!
It makes ice OK, but it won't dispense water. I replaced the main solenoid valve unit and replaced the filter. I'm sure I have the hoses in the right place. I would appreciate any help with this issue. Thank you. Charles R.
For model number FFHS2611PFEA
Hello Charles, thank you for writing. We suggest to check to see if the water pressure is at the correct psi. Also, there is a microswitch PS12724042 located in the dispenser module that could be the issue.
Good luck with this repair.
I need a shelf replacement for the refrigerator and cannot seem to find one...
For model number FFHS2611PFEA
Hello Kathleen, thank you for your question. The plain shelf for the fridge section of this unit is Part #: PS8689182. Please enter the part number into the site for current price and availability. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Janie
January 30, 2020
My ice maker is making a poping sound and not making any ice
For model number FFHS2611PFEA
Hi Janie. This would most likely solved by replacing the ice maker PS12364147. Thank you for your question and good luck with your repair.
Hi Ramone, thank you for reaching out. We would suggest checking the drain line and the evaporator coils for frost build-up. A faulty defrost heater, part number PS2581596, may cause these components to get blocked due to excess ice buildup, which may eventually cause water leakage when the ice melts. The leaking water may come out of both sides and pool on the floor. We hope this information helps!
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
