This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
$15.15
In Stock
Order within the next 3 hrs and your part ships today!
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
$16.83
In Stock
Order within the next 3 hrs and your part ships today!
This door bin holds items on the door of your refrigerator. They are sometimes called Cantilever Shelves as they attach to the refrigerator door by the back of the shelf. This part is sold individually.
$65.93
In Stock
Order within the next 3 hrs and your part ships today!
This NSF-Certified OEM filter is white in color with a plastic housing and extruded carbon filter media. It measures 2.3-Inches deep, 9.1-Inches high and 2.3-Inches wide. It fits certain Frigidaire si...
$92.49
In Stock
Order within the next 3 hrs and your part ships today!
This cover holds up the top crisper drawer, and has drawer glides molded in it. This upper crisper drawer cover is a manufacturer-approved replacement part for your refrigerator. It has drawer glides ...
$112.56
In Stock
Order within the next 3 hrs and your part ships today!
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide....
$85.77
In Stock
Order within the next 3 hrs and your part ships today!
This OEM white door bin is made of white plastic and is easy to install. It is used to hold items in the fridge, and you'll be able to visually see if the part is broken. This part attaches to the fri...
$96.03
In Stock
Order within the next 3 hrs and your part ships today!
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The run capacitor is attached to the compressor. This part is 120 volts a...
$66.01
In Stock
Order within the next 3 hrs and your part ships today!
Questions And Answers for FFHS2611LBRA
Ask our experts a question about this model and we'll get back to you as soon as possible!
21 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Linda
March 21, 2020
Temp alarm on fridge side goes off. Reset it, it starts cooling then goes off again. Check door seal and everything is working..a tight seal. Where do I start?
For model number FFHS2611LBRA
Hello Linda, Thank you for the question. We suggest testing the Defrost Thermostat Kit. The best way to do this is to remove the thermostat from the refrigerator so you can control the temperature of the sensor. You can let the sensor warm up to room temperature. With the sensor warmed up to room temperature the sensor should read approximately 6.2K Ohms at 68°F. With the thermistor submerged is a glass full of ice water, the sensor should be very close to 32°F which should read approximately 16.3K Ohms. If the values that you are getting are far off from these readings, then the sensor is bad and should be replaced. We hope this helps.
Why?I reset the temperature in the 9 and after some hours come lower to 5 or 4 alone...many thanks...
For model number FFHS2611LBRA
Hello Guadalupe, thank you for your question. That issue is probably due to a bad thermistor which is PartSelect Number: PS8760187. This part is found in the controls section in the fridge section. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Greg
August 24, 2021
Code h1 is flashing on the refrigerator side of the temperature control indicator. Can you tell me what that code is for. Thanks
For model number FFHS2611LBRA
Hello Greg, Thank you for the question. The Error code H1 indicates that a sensor shorted in the display. Check wiring between a thermistor and board. If good, replace the thermistor, PartSelect Number PS8760187. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Does this model have a air filter and if so where is it located
For model number FFHS2611LBRA
Hi Frederick,
Glad to hear from you. There is no air filter listed for your refrigerator. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Craig
September 14, 2023
Why ice maker not making ice
For model number FFHS2611LBRA
Hello Craig, thank you for reaching out. Based on our understanding of the issue, we would suggest checking the water filter for blockage. Dirty or clogged water filter prevents ice maker from making ice. If this does not resolve the issue, then you may need to check the water inlet valve, part number PS7784018, to fix the issue. We hope this solves your problem!
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.