This OEM refrigerator filter is for french door and side-by-side door types and is located in the back, top-right of your appliance. By absorbing heavy metals, pharmaceuticals, pesticides, chlorine, a...
This is a genuine Frigidaire part for your refrigerator. This is an ice maker, which connects to the water lines to provide fresh ice. The most common reason to replace this part is if your refrigerat...
This crisper drawer cover assembly is for refrigerators.
The crisper drawer cover assembly includes the crisper drawer cover frame and the insert that covers the drawer. The assembly may include mu...
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
The water inlet valve supplies water to the refrigerator ice maker and water dispenser.
This part works with the following brands: Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Sears...
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
November 8, 2021
What water & ice filter do i need for this refer? I want genuine oem parts. Thinking eptwfu01
Thanks in advance for your assistance. paul
For model number FFHB2750TD8
Hello Paul, thanks for asking! You're correct, the water filter for your exact model is EPTWFU01/PS11704498. To order, you may do so online or by calling one of our friendly agents at customer service. I hope this helps!
Was this helpful?
Thank you for voting!
Bruce
March 29, 2023
Ice maker stoped making ice
For model number FFHB2750TD8
Hello Bruce, thank you for reaching out. Based on the description that you have provided, we would recommend that you check the water pressure from the supply and the temperature setting for the freezer. The water inlet valve supplies water to the ice and water dispensers. The water inlet valve requires a minimum of 20 psi to function properly. Check the water flow and test the pressure to determine if it is at least 20 psi. If the freezer temperature is higher, ice production will be affected. The next thing to check is the water inlet valve. If the water inlet valve is defective or has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice, and you need to replace the water inlet valve, part number PS7321353. Also check the water filter, part number PS11704498. If these do not fix the issue, replace the ice maker assembly, part number PS16221322. We hope this is what you were looking for!
Hello Cathy, thank you for reaching out. Based on our research, your model was most probably manufactured in June 2017. For more specific information, we would require the serial number of your unit. We hope this helps!
Was this helpful?
Thank you for voting!
Andrew
December 6, 2023
How do the inlet valve water lines come off, replacing old valve.
For model number FFHB2750TD8
Hi Andrew, thank you for getting in touch. We have attached a video, which may not be of the exact part, but it will give you a general idea of how the water lines are disconnected from the valve. We hope this is helpful!
Was this helpful?
Thank you for voting!
Kara
March 8, 2024
Is there somewhere I can go for a replacement door for my refrigerator?
For model number FFHB2750TD8
Hello Kara, thank you for reaching out. Your refrigerator comes with 3 doors and they are listed on our site. The left side door for the fresh food section is part number PS12177153, and the right side door for the fresh food section is part number PS12177152. The freezer section door is part number PS12364174. If you require assistance to place an order, please contact customer service!
First I pulled the ice tray out so I could see the solenoid housing/ice tray support(1 unit). Below the ice tray there are 2 screws that hold the solenoid housing/ice tray support. After removing those the assembly lifts up so you can see the wiring harness to disconnect. I pulled it out and removed the 2 screws to open it up. There is 2 screws holding the solenoid in place and one ground wire. This was an easy fix and I know I saved a lot of money.
Simple three steps... 1) There's an front section to the ice-maker to take off. One Phillips screw is on the side, one screw is underneath near the inside of the refrigerator wall. Just unscrew and store. 2) There's a small plastic unit just inside the ice maker to take out. It's held in by a small nut that requires about a 4" extension to reach. (You may be able to unscrew the nut with small needle-nose pliers). Just unscrew and take out the unit - the unit functions just to keep the ice maker wiring in place. 3) The wiring looks a mess, but there's just one wiring connector to the ice maker assembly. Unsnap it. The ice maker is not screwed in, it just slides in -- reach in and pull the assembly straight out; when it stops, lower it a bit and it will come free. Reverse the instructions to install the new unit.
I checked the dampener, it worked. The compressor and fan worked. I knew because my freezer was still hovering around 10 degrees. Coils were clean. Thermistor was the only thing it could be. Took all my shelves out. Removed four screws. Took the back panel off. The thermistor sits tucked in on the side. I piped it out, in clipped it. Used my multimeter to test the numbers. Numbers were off just a bit. Ordered the part. Crossed my fingers.,took less then 5 minutes to put the part in. Plugged in the fridge. It was sitting at 33 degrees in about an hour and a half. I can’t believe I fixed it. I knew NOTHING about refrigerators. For how big my fridge is, it would have cost 3,000 and up to get a new one with the same cu ft size. Instead, it cost me $44. That includes shipping. Thank you Parts Select!! Made it so easy to pick the correct part for my model fridge!
