FFGF3047LSF Frigidaire Range - Overview

Diagrams for FFGF3047LSF

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb – Part Number: 316538904
$35.95
In Stock
Light Bulb
★★★★★
★★★★★
(9)
Part #316538904
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside your appliance. Installation is simple—just unscrew the old bulb and replace it with the new one. If the existing bulb is broken, disconnect power and use needle-nose pliers to safely remove the remaining base. Sold individually, this bulb is a commonly replaced part—consider keeping a spare on hand.
LP Conversion Kit – Part Number: GRLP4
$82.62
In Stock
LP Conversion Kit
★★★★★
★★★★★
(10)
Part #GRLP4
The LP conversion kit is used in ranges
GLASS – Part Number: 5304503232
$135.91
In Stock
GLASS
★★★★★
★★★★★
(24)
Part #5304503232
This is also called the heat barrier glass.
PROBE – Part Number: 316233903
$59.16
In Stock
PROBE
★★★★★
★★★★★
(8)
Part #316233903
Note: Connector could be different than original. If so cut & splice wires together with porcelain wire nuts.
Oven Drawer Handle Screw – Part Number: 316433303
$36.34
In Stock
Oven Drawer Handle Screw
Part #316433303
Order quantity needed.
Oven Light Socket – Part Number: 316116400
$75.74
In Stock
Oven Rack – Part Number: 316067902
$119.86
In Stock
Oven Rack
★★★★★
★★★★★
(2)
Part #316067902
Sold individually.
Leveling Leg Assembly – Part Number: 5304509869
$17.55
In Stock
Leveling Leg Assembly
★★★★★
★★★★★
(3)
Part #5304509869
Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.
CAP – Part Number: 5304508441
$52.38
In Stock
CAP
★★★★★
★★★★★
(2)
Part #5304508441
Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills.
CAP – Part Number: 5304508442
$48.69
In Stock
CAP
★★★★★
★★★★★
(1)
Part #5304508442
Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills. The surface burner cap is located on the top of the burner head and is used in ranges and ovens. The burner cap helps spread out the burner flame for even heating, and protects the burner head from cooking spills. Without the cap you can have a burning gas torch. If your cap is missing or is discolored, replacing this part can solve the issue. This part comes in the color black. Remember to unplug your range from the power source and allow surface to cool before installing this part. Refer to the manual provided by the manufacturer for further installation instructions.
Oven Burner Igniter – Part Number: 5304509706
$228.23
In Stock
Oven Burner Igniter
★★★★★
★★★★★
(1)
Part #5304509706
The oven burner igniter ignites the gas to light the oven burner. Possible Repair Solution For: Will not start, no heat, not enough heat.
CONTROL – Part Number: 5304518661
$202.18
In Stock
CONTROL
★★★★★
★★★★★
(8)
Part #5304518661
This part is a replacement electronic clock/timer for your oven. The clock timer will display the time, and can be used to set a timer. If the clock will not start, will not allow you to program the time or timer, or if the touchpad does not respond at all, you may need to replace the clock. As you will be working around electricity for this repair, be sure to disconnect power from the oven before you begin. This part is sold individually.

Manuals & Care Guides for FFGF3047LSF

Click to download

Questions And Answers for FFGF3047LSF

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hilton - For model number FFGF3047LSF
June 15, 2021
I need new replacements burner caps for each burner (4). Each burner is a different size.Are they sold as a package or individually, if yes? the part #, if no?. individual part # for each cap. price quote. thanks
Chris Boyle Profile
Hi Hilton, thank you for your question. The burner caps for your range are sold individually. The part number for the front-right burner cap is PS2581742. The current cost for the cap is $34.12. The part number for the right-rear burner cap is PS2581737. The current cost for the cap is $28.71. The part number for both the left front and rear burner caps is PS2581740. The current cost for the cap is $31.47 each. To place an order for the burner caps, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
$52.38
In Stock
CAP
$48.69
In Stock
CAP
$52.75
Special Order
CAP
2 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Tim - For model number FFGF3047LSF
November 3, 2023
Propane stove doesn't heat above 320. Replaced the temperature sensor and ignitor.
Chris Boyle Profile
Hi Tim, thank you for the question. We would recommend checking the oven safety valve, part number PS446204. It controls the gas flow to the bake and broil burners in the oven. You may need to replace it to fix the issue. We hope that helps!
$359.52
In Stock
Safety Valve
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Chantay - For model number FFGF3047LSF
November 22, 2023
The stove works perfectly. I can turn the oven on but it does not heat up. Is this something that can be fixed or just bug a new stove.
Chris Boyle Profile
Hello Chantay, thank you for reaching out. Based on our understanding of the issue, we would suggest checking the temperature sensor, part number PS11731754, to solve the problem. We hope this helps!
$59.16
In Stock
PROBE
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the FFGF3047LSF

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Safety valve would not open
126 of 159 people found this instruction helpful.
  • Ed from Darby, PA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers, Wrench set
I am an HVAC tech by trade so it wasn't difficult to diagnose problem with safety valve. The hard part was being without an oven for a week. Repair was simple and effective--oven works good as new.
Shut off gas and unplugged oven. Removed floor of oven between broiler and bake section, used wrenches to disconnect gas line from saf ety valve in back of oven, used philipps head screwdriver to remove burner assembly and gas valve, reversed process to replace. Checked out operation--OK.
Was this helpful?
Thank you for voting!
We had a transformer go out in our block and made a surge which blew out the electronic oven control
89 of 102 people found this instruction helpful.
  • Alberto from Houston, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
The repair of the oven was really easy . I removed a total of 7 screws with a 1/4 inch nut driver to remove the back cover of the instrument panel. I then unplugged the wires from the from the oven control and with a phillups screw driver I removed 4 screws that hold the oven control,the face plate with the words on it has to be taken of f the old control and put on the new one . I then installed the new oven control by putting the 4 screws back on and plugging back the wires. I then replaced the back cover with the 7 screws and plugged the power back in the outlet, The clock has to be adjusted and your done.
Was this helpful?
Thank you for voting!
Range would not come on
107 of 192 people found this instruction helpful.
  • MaryLou from Monroe, NC
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Turned off power, took back off stove removed old probe.
I had to splice wires since new probe ends did not match up.
the instructions were to splice the wires. I had the breaker off for about 3 hours. this is not in the instructions, but being a widow, I had to ask a few people why it would not come on after I connected the wir es.
After waiting, I turned the breaker on and my range came back on.
Was this helpful?
Thank you for voting!