Range Oven Door Handle. This door handle is white in colour. 29" in length
This part works with the following brands: Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Sears, Tappan, & E...
This part is a replacement electronic clock/timer for your oven. The clock timer will display the time, and can be used to set a timer. If the clock will not start, will not allow you to program the t...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
March 2, 2020
What do i need to convert this stove from natural gas to propane??
For model number FFGF3011LWC
Hello Ron, thank you for your question. The LP conversion kit for your model is part number PS2358939. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Yatriz
October 19, 2021
My front burners were rusted and broke. I want to know which parts I need to buy to change them and the name of the tool to install them. Thanks
For model number FFGF3011LWC
Hello Yatriz, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS11770472 for the front Burner and Part #: PS11770471 for the Back Burner. The Burners snap into place with the retainer, no tools required. We hope this helps!
Hello Tom, thank you for reaching out! We have researched the model you mentioned and found the part you are looking for is the liquid propane (LP) conversion kit, part number PS2358939. The LP conversion kit contains the orifices needed to convert the range to liquid propane gas. If you require assistance placing an order, please contact customer service.
My oven has a hard time getting to temperature and if I turn it on and off then it gets back to temperature. It will beep to say it's preheated but the thermometer that I have placed in the oven says different I'm just wondering what part should I order?
For model number FFGF3011LWC
Hi Jason, thank you for getting in touch. Based on the description that you have provided, we would recommend checking the temperature sensor, part number PS11731754. Good luck with your repair!!
Hello Teresa,
Thank you for your question. Your model does not have a self cleaning function for your oven, which would explain why there is not self cleaning button. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I am an HVAC tech by trade so it wasn't difficult to diagnose problem with safety valve. The hard part was being without an oven for a week. Repair was simple and effective--oven works good as new. Shut off gas and unplugged oven. Removed floor of oven between broiler and bake section, used wrenches to disconnect gas line from safety valve in back of oven, used philipps head screwdriver to remove burner assembly and gas valve, reversed process to replace. Checked out operation--OK.
The repair of the oven was really easy . I removed a total of 7 screws with a 1/4 inch nut driver to remove the back cover of the instrument panel. I then unplugged the wires from the from the oven control and with a phillups screw driver I removed 4 screws that hold the oven control,the face plate with the words on it has to be taken off the old control and put on the new one . I then installed the new oven control by putting the 4 screws back on and plugging back the wires. I then replaced the back cover with the 7 screws and plugged the power back in the outlet, The clock has to be adjusted and your done.
Turned off power, took back off stove removed old probe. I had to splice wires since new probe ends did not match up. the instructions were to splice the wires. I had the breaker off for about 3 hours. this is not in the instructions, but being a widow, I had to ask a few people why it would not come on after I connected the wires. After waiting, I turned the breaker on and my range came back on.