Need more room and better organization in your upright freezer? This sliding wire shelf makes it easy to store and access frozen foods. It’s about 26.75 inches wide and 14.875 inches deep, giving you plenty of space to work with. It slides in and out smoothly and fits into many freezer models, helping you keep things neat and easy to reach.
Stable food storage depends on shelf supports that are firmly attached and free from damage. A worn clip can allow a wire shelf or basket to tilt, rattle, or fall. Check whether the replacement is made for the right or left side, since the pieces may not be interchangeable. Match it to the full refrigerator or freezer model. Empty the she...Read morelf, remove it carefully, and press the new clip into its mounting point without forcing it. Do not reload the shelf until it feels secure.
Keep your refrigerator running at the right temperature with this genuine wire harness. It links the control dial to the electrical system so you can set and maintain the perfect cooling level. If your fridge isn’t holding temperature or the dial feels unresponsive, this part is the fix you need. Easy to install and built for long-lasting reliability.
This genuine OEM door auto closer hook helps ensure your refrigerator or freezer door closes securely by providing a smooth, self-closing action at the hinge. Designed to support proper door alignment and sealing, it helps maintain consistent internal temperatures and prevent energy loss. If the door is not closing fully, pops open, or ap...Read morepears misaligned, replacing this component can help restore proper operation and reliable performance.
Designed for secure and reliable fastening, this genuine OEM quad hex washer head screw provides the strength and precision needed to hold internal refrigerator components firmly in place. Its durable construction ensures a tight fit for mounting shelves, bins, trim panels, and other hardware, helping maintain proper alignment and structu...Read moreral integrity. Built to meet exact factory specifications, it is an ideal replacement for stripped, worn, or missing screws, restoring stability and ensuring dependable performance throughout your appliance.
If your freezer isn’t cooling properly or the controls aren’t working like they should, the main control board might be the issue. This part manages temperature, defrosting, and fan speed to keep everything running smoothly. It’s a genuine replacement made for a variety of models. Just check your model number to make sure it’s the right fit before installing.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tyler - For model number FFFH20F3WW0
March 12, 2024
I have a freezer that will work fine for around a month and then it will warm up and not freeze. During these issues the evaporator and fan get all iced up. What could the issue be? Could it be the defrost sensor? Once I let the ice thaw and plug it back in it seems to work fine for another month or so and then have the same issue. Thanks for your time!
Hi Tyler, thank you for getting in touch. Based on the description, we have concluded that the issue is with the defrost thermostat, part number PS12746820. We would recommend replacing the thermostat to fix the issue. Good luck with your repair!
The freezer light is inop and no change in freezer operation when door opens. Possible red switch?
Hi Darrell, thank you for your inquiry. The most likely causes are a burned-out light bulb, part number PS12731499, or a faulty door switch, part number PS16544346. Inspect the bulb first and make sure it is working. Since the freezer operation isn't changing when the door opens, the door switch is faulty. You will need to check the door switch, to fix the issue. Glad to be of help!
There's a clicking sound and the internet says its the relay kit is needed, I can't seem to find it can you please help me.. get some expert to call please
Hello Sheila, thank you for contacting us. The reason you can't find a standard start relay kit for your freezer is that this model uses a modern variable-speed compressor powered by an electronic inverter control board, part number 5304523779, rather than a traditional mechanical start relay. Replacing it can help the compressor start properly and eliminate the clicking noise. We hope this solves your problem!
green light flashing at the bottom at the front and beeps and when it does this the unit starts to thaw- any thots ? Flashes are just a steady pulse no sequence to it
Hello Herb, thank you for the great question. According to our research on your model, the green light will flash continuously when the appliance is first plugged in until the unit reaches the selected temperature. We hope this information is useful!
Was this helpful?
Thank you for voting!
Sonia - For model number FFFH20F3WW0
November 3, 2023
Is there a reset switch on this freezer? The door was left open and the freezer started defrosting. It doesn't seem to get below 6°C since.
Hi Sonia, thank you for the question. Based on our research, your model does not come with a reset switch. If the freezer door was left open for several hours or longer, It will take it many hours to cool back down. It is important to keep the freezer controls just where they were before. Avoid opening the door constantly while the freezer is working and make sure the door is sealed properly, as it might prevent the freezer from cooling. If the issue still persists, we would recommend checking the evaporator fan motor, part number PS12746805. If this part is faulty, you may need to replace it. We hope that helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bought a new upright freezer. Love it but I made sure to get a model that has options to adjust the shelves. Then I bought a new shelf with clips. I felt there was too much room between the shelves as it came from the store. That would just result in stacking packages and too easy to lose what wa
9 of 12 peoplefound this instruction helpful.
Mary from DAYTON, OH
Very Easy
Less than 15 mins
I just moved the middle shelves up and down to create enough space for another shelf. Worked out beautifully
so not to disrupt items on the shelves we purchased an extra shelf so we could flash freeze items on a baking sheet after they are frozen then placed in a seal meal bags the items won't stick together the extra shelf allows you about 3 inches of space for a backing sheet
My Orders
