The Lower Spray Arm is used in your dishwasher to spray water and clean your dishes. If broken there will be visible damage or your dishes may no longer be cleaned properly. If your spray arm is broke...
This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing wate...
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, o...
This door seal is for dishwashers.
Door seal seals the gap between the opening to the dishwasher tub and the outer edge of the door.
After installing the door seal, shut the dishwasher door and ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rodney
September 23, 2022
Door will not lock or will not unlock when cycle is complete
For model number FFCD2413UW4A
Hi Rodney, thank you for contacting us. If your door does not lock or unlock after a wash cycle, it means the latching mechanism of your dishwasher door has failed. You will need to check the door latch, part number PS16218716. Check the door strike, part number PS16745697, if it works properly. The strike plate catches the door latch. Please contact us anytime if you require further assistance.
looking for the part that is attached to door and hooks on to metal latch on machine to hold door closed
For model number FFCD2413UW4A
Hello Ernie, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PS16218716. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
André
December 8, 2023
After starting, regardless of the program, the dishwasher draws water and pumps it out again immediately. The appliance therefore always remains dry and does not wash.
For model number FFCD2413UW4A
Hello Andre, The most common cause is a faulty drain pump PS8689824 or drain hose. The drain pump can become blocked with debris, preventing it from functioning properly and causing the dishwasher to continually run. Thank you and have a great day.
After starting the dishwasher draws water and pumps it out again immediately.
It can't be the drain hose. I have tested the appliance completely without a drain hose and the appliance pumps all the water, that flows in, immediately out again in the same quantity after starting.
2 QUESTIONS:
1. The appliance does not need a drain hose connected in order to work, does it?
2. As the appliance immediately pumps the incoming water out again, the drain pump must be in order, right?
For model number FFCD2413UW4A
Hello André, thank you for getting in touch. Based on the description that you have provided, the issue is with the electronic control board, part number PS16731602. It manages the functions of the dishwasher, such as washing, draining and drying. The drain pump is draining water, means that the drain pump is fine. The drain hose needs to be connected to the drain pump in order to drain water out of the appliance. We hope this information helps!
Dishes are clean but water is left in bottom. There are no kinks in the line and no leaks
For model number FFCD2413UW4A
Hello David, thank you for your inquiry. According to our understanding, the issue is most probably with the drain pump, part number PS8689824. It removes the water from the dishwasher tub during the drain phase of the dishwashing cycle. You may need to replace it to fix the issue. We hope this helps!
I have had to keep replacing the spray arm on the bottom of my dishwasher which takes like 2 seconds to do.. First you open the dishwasher and than pull the bottom basked forward and reach down and pull the spray arm up and pop the bottom of the spray arm off and put it on the new spray arm and slip it back into the dishwasher over the thing that makes it spin around.. but the tricky part is and I didn't know this and this is why my dishwasher spray arm kept falling over and melting on the heating element.. you have to turn it till it clicks in.. and your done..
I removed old tub gasket, which the door presses against to make a seal, and put the new one in. Flat tip screwdriver was used to gently press gasket in.