The Lower Spray Arm is used in your dishwasher to spray water and clean your dishes. If broken there will be visible damage or your dishes may no longer be cleaned properly. If your spray arm is broke...
This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing wate...
The upper spray arm helps distribute water from the top of the dishwasher tub.This spray arm is a genuine OEM replacement part for your dishwasher. This spray arm is for the upper part of your dishwas...
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, o...
This part is a replacement spray arm support for your dishwasher. It is made of white plastic and is approximately 3 inches long, 1 inch wide, and 3 inches tall. This is the support for the lower spra...
This door seal is for dishwashers.
Door seal seals the gap between the opening to the dishwasher tub and the outer edge of the door.
After installing the door seal, shut the dishwasher door and ...
If your dishwasher isn’t cleaning like it used to, this circulation pump motor assembly might be the solution. It helps move water and detergent through the spray arms, ensuring your dishes come out s...
This plastic cover and stem assembly helps hold the lower spray arm in place.
$39.21
In Stock
Questions And Answers for FFBD2406NB7B
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
July 7, 2021
Dishwasher won't start. Light blinks when the start button is pushed.
For model number FFBD2406NB7B
Hello Jim, Thank you for the question. We suggest checking the Latch Assembly. The switches in the Latch tell the Control Board when the door is closed and safe to start. We hope this helps, good luck with this repair!
Hello,
Dishwasher won't start even though the panel lights are on.
removed the latch assembly to find that the wiring into the assembly was fried.
this explains why the dishwasher would not start.
found the latch assembly in stock but also need the wiring connectors that go into assembly. do you have that item?
also, is this a common problem?
thanks
For model number FFBD2406NB7B
Hi Pamela,
Thank you for your question. The part number listed under your model number for the wiring harness is PS11770421. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
I ran a load of dishes yesterday and found the bottom of the tub was full and it was leaking into the floor. I stopped the cycle then and used a shop vac to get the water out. What could my issue be? Now i will say it is like 9 degrees outside and im wondering if my drain line had frozen as I live in Arkansas and hardly ever get temps this low
For model number FFBD2406NB7B
Hello Preston, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the drain hose for blockage. If the drain hose is not clogged, then you may need to replace the drain pump, part number PS8689824, to solve the problem. We hope this helps!
Repair was simple. I unscrewed the old grommet which held the old spray arm and screwed-on the new one. About 30 seconds was required. Other people having this problem should note that the spray-arm is made of three pieces which are inseparable when the arm is new. The arm is sold in this form. However, when your machine is having the problem that the arm falls off, the three pieces become separate. When you want to replace the spray arm, only one new part needs to be ordered because this part encompases all three components.
I have had to keep replacing the spray arm on the bottom of my dishwasher which takes like 2 seconds to do.. First you open the dishwasher and than pull the bottom basked forward and reach down and pull the spray arm up and pop the bottom of the spray arm off and put it on the new spray arm and slip it back into the dishwasher over the thing that makes it spin around.. but the tricky part is and I didn't know this and this is why my dishwasher spray arm kept falling over and melting on the heating element.. you have to turn it till it clicks in.. and your done..
