Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
This part has been replaced by the manufacture. It may differ in appearance but will still function the same.
$176.51
In Stock
Questions And Answers for FEB30S5DCA
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Florence
July 3, 2023
Turned oven on, started to smell a burning plastic smell opened oven to look shut wall oven door and whole oven power went off. Checked fuse box after that oven came back on and we turned it on oven showed starts of shortage and went back off. What is wrong?
For model number FEB30S5DCA
Hello Florence, thank you for your query. We have found that such problems occur when an electrical malfunction short circuits the oven’s wiring, conversely melting its insulation. Sometimes a short circuit may even cause other oven components to burn, resulting in a foul, burning rubber or plastic-like smell. To determine whether that’s the culprit, unplug the oven from the power outlet and inspect the interior for signs of burned wiring insulation or oven components. If found any, you may need to check the wiring harness, part number PS12176109, to fix the issue. We hope this solves your problem!
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
I pulled my unit out of the wall and noticed that the insulation around the top broiler element was a bit brown. Closer inspection revealed that the element had shorted somehow to the oven itself and caused the element to become non-functional. I tried measuring the resistance first, and it was within typical values for the other elements, but I decided to replace the element anyway.
I ordered from PD and the part arrived just a few days letter by regular shipping. I undid the screws holding in the element, undid the wire connectors and replaced the broken element with the new one. The element worked like a charm and I was back in business for cooking.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.