FCWM2727ABA Frigidaire Microwave Oven Combo - Overview

Diagrams for FCWM2727ABA

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Main Terminal Block Kit – Part Number: 5304409888
$48.78
In Stock
Main Terminal Block Kit
★★★★★
★★★★★
(11)
Part #5304409888
Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.
FUSE – Part Number: 5304509451
$32.54
In Stock
Glass Cooking Tray – Part Number: 5304509621
$192.61
In Stock
Glass Cooking Tray
★★★★★
★★★★★
(10)
Part #5304509621
This round glass tray fits select microwaves and measures about 13 1/2 inches across. It holds food and turns during cooking to help heat it more evenly. The tempered glass has grooves underneath that connect with the turntable support or center coupler. Replace the tray if it is cracked, chipped, broken, or no longer turns correctly.
SWITCH – Part Number: 5304509460
$66.56
In Stock
SWITCH
★★★★★
★★★★★
(4)
Part #5304509460
This microwave door switch works with the door latch to control when the appliance can run, a worn switch may cause the microwave to lose power, fail to start, or trip a breaker, it fits select upper and lower switch locations, high voltage may remain inside the microwave after power is removed, use a trained technician for installation, confirm fit with the exact model number.
Fan Blade Retainer Nut – Part Number: 316136600
$39.95
In Stock
Steel Washer – Part Number: 316008401
$24.95
In Stock
Steel Washer
★★★★★
★★★★★
(1)
Part #316008401
Size: 3/4 inch od x 1/4 inch id
PROBE – Part Number: 5304525427
$62.31
In Stock
PROBE
Part #5304525427
This genuine OEM oven temperature sensor probe monitors the internal temperature of the oven to ensure accurate and consistent cooking performance. By sending temperature readings to the control system, it helps regulate heating and prevent overcooking or undercooking. Ideal for replacing a faulty sensor, it restores proper temperature control and even cooking results. For safe installation, always disconnect power and allow the oven to cool before beginning the repair.
SCREW – Part Number: 316021109
$29.95
In Stock
SCREW
Part #316021109
Sold Individually.
THERMOSTAT,SAFETY,125C – Part Number: 5304538823
$30.95
In Stock
Toe Panel Insulation – Part Number: 318372017
$33.95
In Stock
SWITCH – Part Number: 808136601
$57.27
In Stock
TUBE – Part Number: 139021700
$36.95
In Stock
TUBE
Part #139021700

Common Symptoms of the FCWM2727ABA

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cord was not tightened enough by delivery crew.
109 of 174 people found this instruction helpful.
  • Timothy from Spring Valley, AL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools neede d are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Was this helpful?
Thank you for voting!
Microwave tripped circuit breaker when turned on
41 of 68 people found this instruction helpful.
  • Arthur from LUTZ, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
Was this helpful?
Thank you for voting!
Pressing the start, microwave will start and dies out. Electric is tripping.
11 of 18 people found this instruction helpful.
  • ARNEL from WAUKEGAN, IL
  • Easy
  • 15 - 30 mins
  • Screw drivers
The diagnosis is about an hour. Coz, I need to open the control panel, got a tester, and trsted all critical parts inside the panel.
Also, replaced the fuse just to make sure its a new one. Found out it was a switch (bottom part) that control the open/close of the microwave door.

When found out the problem, the rest of t he work is easy.
Was this helpful?
Thank you for voting!