FCRE3052BBA Frigidaire Range - Overview
Sections of the FCRE3052BBA
[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
ELEMENT
PartSelect #: PS16763418
Manufacturer #: 5304533520
Dual Radiant Surface Element
$105.31
In Stock
Radiant Element with Limiter - 1200W
PartSelect #: PS1528719
Manufacturer #: 318178110
The 6” radiant cooking element with limiter fits under the glass cooktop and supplies heat to the cooking area. If your element is not heating, you can test the element for continuity with a multimete...
$141.21
In Stock
SWITCH - RADIANT DUAL
PartSelect #: PS17989560
Manufacturer #: 140173679014
If your stove’s large burner isn’t heating properly or won’t adjust, this dual switch could be the fix. It controls the heat for a 9-inch/12-inch element and helps you cook with precision. Easy to ins...
$46.88
In Stock
Rack
PartSelect #: PS16731592
Manufacturer #: 5304531722
Measurements: approximately 22 7/8" x 16 1/4"
$67.62
In Stock
PROBE
PartSelect #: PS16660686
Manufacturer #: 5304526310
This probe is a replacement sensing component used to monitor internal temperatures or operating conditions. It is commonly replaced when readings become inaccurate or system performance is affected by faulty sensing.
$57.02
In Stock
SWITCH
PartSelect #: PS16218333
Manufacturer #: 5304522966
This single infinite control switch regulates power to one surface burner on an electric range or cooktop, allowing you to adjust and maintain precise cooking temperatures. Unlike a basic on/off switc...
$87.06
In Stock
SWITCH
PartSelect #: PS12746370
Manufacturer #: 5304522964
This switch is an electrical component used to open or close a circuit, enabling controlled operation of specific appliance functions. Engineered for dependable performance, it supports consistent res...
$69.02
In Stock
Questions And Answers for FCRE3052BBA
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the FCRE3052BBA
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
burned out burner
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the different sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
Parts Used:
-
Lori from Winter Haven, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
70 of 97 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Center of dual burner was broken
Removed screws on the sides and front.
Labeled the wire sets connected to the front control panel.
Gently lifted up the stove top and flipped it over on to a towel.
Removed the piece of metal holding down the burner.
Disconnected the cables to the old burner.
Repeated steps above in reverse.
Labeled the wire sets connected to the front control panel.
Gently lifted up the stove top and flipped it over on to a towel.
Removed the piece of metal holding down the burner.
Disconnected the cables to the old burner.
Repeated steps above in reverse.
Parts Used:
-
German from SELLERSBURG, IN
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
9 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 elements stopped working.
My husband followed the video instructions and it was easy to fix.
Parts Used:
-
Ruth from MORGANTOWN, WV
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
8 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!