The Oven Bake Element is a black, metal part which supplies heat to the oven. This element is 19-1/2" wide x 18-1/2" long and has 3-1/2" inserts. It is rated as "Easy" to install by users, and attache...
$60.68
In Stock
Order within the next 6 hrs and your part ships today!
This is a replacement rack for your oven. The oven rack fits into grooves on the side of the oven wall, and acts as a shelf that you can place food items on when you want to cook them in the oven. Thi...
$155.14
In Stock
Order within the next 6 hrs and your part ships today!
This oven door outer panel is for ranges Oven door outer panel covers the outermost part of the oven door. Wait until the surface is cool to the touch before starting the repair. Wear work gloves to p...
$411.55
In Stock
Order within the next 6 hrs and your part ships today!
Questions And Answers for FCRE3052ASA
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
November 23, 2022
The orange "on" / "stove hot" light stays on even when the knob indicators are off. This is on the right hand side when facing the stove. The light has been on for about 3 weeks straight now. This light never goes out as it used to once the stove cooled down. The eye on the left side front to a red hot (very high heat) level for a few minutes then usually goes out and begins to work properly after several minutes. Thanks for any assistance
For model number FCRE3052ASA
Hello Robert, thank you for asking. Our research on your model shows that there may be an issue with the light indicator or the burner switch. You may need to replace the light indicator, part number PS436960. If that does not help, we would recommend replacing the burner switch, part number PS1145040. If you require assistance to place an order, please contact customer service. We hope that helps!
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element). 2. Ordered the part from partselect.com 3. Disconnected element, connected the new one, and screwed it back in.
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the wires. Threw the old element pieces in the garbage. Connected the new element to the connecting wires and re-fastened the hex nuts. My husband had wanted to call the repair man, but it didn't look too difficult, so I decided to try it on my own. Boy was he surprised when I fixed it, and for a fraction of the cost of hiring a repairman! Ladies, we can do this ourselves!!! :) Thank you for being there for us to order our part from, Parts Select, we had our new part in less than 24 hours, so the shipping was blazing fast!!! Keep up the good work!!! :)