This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing wate...
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, o...
This door seal is for dishwashers.
Door seal seals the gap between the opening to the dishwasher tub and the outer edge of the door.
After installing the door seal, shut the dishwasher door and ...
This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishw...
This filter is for dishwashers.
The filter removes food particles and debris from the water to prevent the drain from clogging.
Follow the instructions in the manual when installing this part.
This rail end cap, or dishrack stop clip, is a genuine OEM replacement part for your dishwasher. This part keeps the rack in your dishwasher from sliding out. This is a very easy repair, to complete i...
$9.27
In Stock
Questions And Answers for FBD2400KB9B
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JD
February 13, 2023
I LIVE IN AN APARTMENT THAT HAS THIS MODEL. WHAT YEAR WAS THIS MODEL MANUFACTURED
For model number FBD2400KB9B
Hello JD, thank you for your question. The unit was manufactured in 2014. We are pleased to have been able to help.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Greg
January 13, 2024
How do I fix the door latch on the dishwasher. It won't close
For model number FBD2400KB9B
Hi Greg, thank you for contacting us. If the dishwasher door won’t close or latch, it might be because the door spring tension is improperly set. You may need to increase the spring tension by moving the spring end toward the back of the dishwasher. If this does not solve the issue, then you may need to replace the door latch, part number PS16218717. We hope this information helps!
Hello Butch, thank you for your question. The Detergent Dispenser PS11770487 needs to be replaced. If your dishes are not coming clean, or you notice the detergent is still in the dispenser at the end of the cycle, you may have a damaged or malfunctioning detergent dispenser. We have an installation video for you to access to see if this is a repair for you. We look forward to hearing from you soon.
I removed old tub gasket, which the door presses against to make a seal, and put the new one in. Flat tip screwdriver was used to gently press gasket in.
Over Thanksgiving, the spray arm in my dishwasher apparently popped off and was partially melted. I remounted it inside the dishwasher, but the new hole was on the side of the arm. I think this resulted in water being sprayed directly against the door and not up through the top holes. It flooded my kitchen floor.
The spray arm pops on and off with plastic tabs (?) at the base. You can lightly pry with a butter knife or simply wiggle it off. The new one popped right on. Easiest repair EVER.