F1091QDP2 (ABWPARA) LG Washer - Overview
Sections of the F1091QDP2
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
CAP,DRAIN HOSE
PartSelect #: PS3635866
Manufacturer #: 5006EN3015A
This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before be...
$13.15
In Stock
Ball Bearing
PartSelect #: PS7785069
Manufacturer #: 4280EN4001C
The tub bearing supports the spin basket shaft at the back of the washing tub. If your washing machine will not spin, is leaking water, or if there is a loud screeching noise during the wash cycle, th...
$65.95
On Order
Washer Leg Assembly
PartSelect #: PS7788210
Manufacturer #: AFC72909305
This levelling leg is a genuine replacement part. It is used to help keep your washing machine stable and balanced. It helps support your appliance. It screws into the base of your washer, and you can...
$46.01
In Stock
Washer Tub Bearing, Rear
PartSelect #: PS11705912
Manufacturer #: 4280EN4001F
Is your LG washing machine not performing as it should? It might be time for a new tub bearing. This genuine part, specially made for LG rear tub models, could be exactly what you need. A functioning ...
$56.05
In Stock
HOSE,PUMP
PartSelect #: PS12749675
Manufacturer #: 5214EN3042P
This pump hose carries water between internal components, supporting proper circulation or drainage during operation. Built from durable, flexible materials, it is replaced when leaks, cracks, or restricted flow occur.
$59.35
Special Order
FILTER Assembly
PartSelect #: PS6012658
Manufacturer #: EAM60991301
We know how frustrating a noisy washing machine can be, and the Filter Assembly Noise Filter Assembly from LG is here to help. This noise filter is not just any part, it's a genuine original equipment...
$72.55
In Stock
Common Symptoms of the F1091QDP2
[Viewing 4 of 4]Leaking
Fixed by
these parts
these parts
Show All
Noisy and Marks Left on Clothes
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Burning smell
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
washer tub shakes violently during spin cycle.
turn washer on it's side. dampers are visible from underneath. use needle nose pliers to "pinch" end of retaining pin and pull pin out. it will take some force to remove. i would recommend replacing all 3 as i had one that had a mounting tab broken off. i then realized the other dampers were bad. there should be resistance in the up and down motion. if not replace.
Parts Used:
-
charlie from LAUDERHILL, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drum was making a very load grinding sound
I took the washer completely apart and ordered any parts that looked worn and put it back together. It’s working like new and will last for a few years
Parts Used:
-
willard from RIVERSIDE, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers, Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!