The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or c...
This right-side latch head helps secure the door in the closed position, ensuring proper alignment and safe operation. It is replaced when the door does not latch correctly or opens unexpectedly.
This latch secures doors or access panels during appliance operation. Reliable latching helps ensure safety and proper function. Replacing a worn or broken latch restores secure closure and dependable performance.
Looking to solve an appliance issue? We've got an authentic Frigidaire microwave waveguide cover that might be exactly what you need! This crucial part serves an important role ? it safeguards your wa...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Henry
December 3, 2024
It has no power. How do I remove the oven to get to the fuse?
I checked around, but could not find any mounting screws. If you have actual pics of where the screws are located, I would greatly appreciate it.
Fixed the oven myself. So I believe I can do the same with this microwave
For model number EW30SO60LSA
Hi Henry,
Thank you for your question. Before you begin any repair, please unplug the appliance from the electrical outlet. Use a Phillips head screwdriver to unthread the screws securing the grill. With the screws removed, open the microwave oven door then the slide the grill to the left and lift up to remove it. Next remove the control panel mounting screw and then lift the control panel up to detach. Then remove the screw holding the inner access panel and then release the panel from the retaining clips. To avoid injury, you will need to release the potentially dangerous charge from the capacitor by placing a screwdriver with an insulated handle across the terminals. Be careful not to touch the metal portion of the tool. Use pliers to detach the old fuse from the noise filter board. Install the new fuse by snapping it into the bracket. Replace the inner access panel and secure it with the screws. Now insert the control panel tabs into the slots in the frame and push the panel down. Secure it with the mounting screw. Insert the tabs of the grill into the frame and slide it to the right. Shut the oven door and then secure the grill with the screws. Plug the power cord back in and the microwave should now work. We hope this helps. If you would like to place an order for a fuse, customer service is open 7 days a week and anyone will be happy to assist you. We hope this helps!
Was this helpful?
Thank you for voting!
Dinesh
January 16, 2024
Change the fuse and work for only 1 minute and stop working, so what other parts not working
For model number EW30SO60LSA
Hello Dinesh, thank you for contacting us. Based on the description that you have provided, the issue could be with the power board, part number PS3633517. We would recommend replacing it to solve the problem. We hope this solves your problem!
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a 12 volt battery and it was bad. Ordered a new one from Part select and got it fast . Works great .
After unplugging the unit remove the control face buy removing the screws. All three door switchs are on a bracket on the left. Remove the two screws holding the bracket in place and pull out. Disconnect the wires from the three switches and test each switch indivually to determine the bad one. I used a multimeter set on ohms.Replace the bad switch with the new one and replace all the wires. Reassemble the unit and you are good to go.
