ER48D Dacor Range - Overview
Sections of the ER48D
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
SVC-SET GRATE SUPPORTPAD KIT;66916,ERD36
PartSelect #: PS16628397
Manufacturer #: DE81-03916A
The rubber feet, also known as the burner grate foot, is used on the bottom of gas burner grates for a range and cooktop. The rubber feet help the grates sit on the top of a burner cap properly and wo...
No Longer Available
Bulb Halogen
PartSelect #: PS16629804
Manufacturer #: DE81-05798A
Restore visibility inside or beneath a compatible cooking appliance with this low-voltage halogen replacement bulb. Rated at 12 volts and 20 watts, it features a G4 two-pin base that fits into the app...
$111.14
In Stock
Order within the next 4 hrs and your part ships today!
SVC-THERMAL SW HI TEMP CUTOU;82987,DR30D
PartSelect #: PS16628411
Manufacturer #: DE81-03938A
No Longer Available
SVC-FILTER CONVECTION OVEN;82891,DO130
PartSelect #: PS16629177
Manufacturer #: DE81-04961A
No Longer Available
SVC-BAKE ELEMENT KIT SERVICE;701088,MOH1
PartSelect #: PS16627876
Manufacturer #: DE81-03196A
No Longer Available
Micro Switch
PartSelect #: PS16631124
Manufacturer #: DE81-07625A
$46.95
In Stock
Order within the next 4 hrs and your part ships today!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Foil burned onto bake glass
A foil oven liner was accidentally placed on the bake glass which covers the heating element. This is a very simple repair with the correct size allen wrench. Unscrew the screws to the liner holding the bake glass in place, take out the old bake glass, put in the new one and screw the liner back in place.
Parts Used:
-
Brandon from Atlanta, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two striped out screw heads
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
Parts Used:
-
David from MCKINNEY, TX
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
3 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!