EORS136SCH Dacor Wall Oven - Overview
Sections of the EORS136SCH
[Viewing 5 of 5]
Manuals & Care Guides for EORS136SCH
Click to downloadKeep searches simple, eg. "belt" or "pump".
Bulb Halogen
PartSelect #: PS16629804
Manufacturer #: DE81-05798A
Restore visibility inside or beneath a compatible cooking appliance with this low-voltage halogen replacement bulb. Rated at 12 volts and 20 watts, it features a G4 two-pin base that fits into the app...
$111.14
In Stock
SVC-FILTER CONVECTION OVEN;82891,DO130
PartSelect #: PS16629177
Manufacturer #: DE81-04961A
No Longer Available
Halogen Light Service Transformer
PartSelect #: PS16628283
Manufacturer #: DE81-03753A
$143.88
On Order
SVC-HIGH LIMIT SWITCH 220F;62775,DO130
PartSelect #: PS16629186
Manufacturer #: DE81-04971A
An oven that suddenly stops heating may have an open high-limit switch. This safety device monitors heat near key electrical parts and interrupts power if the temperature reaches its set limit. Its 22...
$121.72
Special Order
SVC-SUPPRT RACK W SCREWS KIT;701038,DACM
PartSelect #: PS16627895
Manufacturer #: DE81-03228A
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Foil burned onto bake glass
A foil oven liner was accidentally placed on the bake glass which covers the heating element. This is a very simple repair with the correct size allen wrench. Unscrew the screws to the liner holding the bake glass in place, take out the old bake glass, put in the new one and screw the liner back in place.
Parts Used:
-
Brandon from Atlanta, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two striped out screw heads
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
Parts Used:
-
David from MCKINNEY, TX
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
3 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!