EORD230 (BLK) Dacor Range - Overview

Diagrams for EORD230

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broiler Assembly – Part Number: DE81-07354A
No Longer Available
Broiler Assembly
Part #DE81-07354A
SVC HINGE KIT – Part Number: DE81-10161A
No Longer Available
SVC HINGE KIT
Part #DE81-10161A
Screw Wafer – Part Number: DE81-02250A
No Longer Available
Screw Wafer
Part #DE81-02250A
Bulb Halogen – Part Number: DE81-05798A
$111.14
In Stock
Bulb Halogen
Part #DE81-05798A
Restore visibility inside or beneath a compatible cooking appliance with this low-voltage halogen replacement bulb. Rated at 12 volts and 20 watts, it features a G4 two-pin base that fits into the appropriate socket. A burned-out, flickering, cracked, or darkened bulb may indicate that replacement is needed. Before installation, disconnect the appliance from power, let the bulb and surrounding surfaces cool, and avoid touching the new bulbs glass directly. Confirm the electrical rating and socket style before purchase.
SVC-FILTER CONVECTION OVEN;82891,DO130 – Part Number: DE81-04961A
No Longer Available
Relay Board (Double) – Part Number: DE81-05671A
No Longer Available
Relay Board (Double)
Part #DE81-05671A
Service Socket Probe Kit – Part Number: DE81-07997A
$165.26
Special Order
Service Socket Probe Kit
Part #DE81-07997A
Door Gasket – Part Number: DE81-09947A
No Longer Available
Door Gasket
Part #DE81-09947A
Convection Element Kit – Part Number: DE81-04511A
No Longer Available
Convection Element Kit
Part #DE81-04511A
Hinge Receptacle Kit – Part Number: DE81-05658A
$90.55
Special Order
Hinge Receptacle Kit
Part #DE81-05658A
Halogen Light Assembly – Part Number: DE81-05611A
No Longer Available
Halogen Light Assembly
Part #DE81-05611A
SVC-HIGH LIMIT SWITCH 220F;62775,DO130 – Part Number: DE81-04971A
$121.72
Special Order
SVC-HIGH LIMIT SWITCH 220F;62775,DO130
Part #DE81-04971A
An oven that suddenly stops heating may have an open high-limit switch. This safety device monitors heat near key electrical parts and interrupts power if the temperature reaches its set limit. Its 220?F rating must match the appliance design. A tripped or failed switch can prevent normal operation, but it should not be replaced without checking why the area became too hot. Inspect the cooling fan, vents, wiring, connectors, and control system first. Turn off the circuit breaker and confirm that no power is present before service. Let all surfaces cool, transfer the wires carefully, and install the switch in its original position.

Common Symptoms of the EORD230

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
My hinge receptacle was groove was worn away cause hinge to get jam
2 of 2 people found this instruction helpful.
  • JEFFREY from KNOXVILLE, TN
  • Difficult
  • 30 - 60 mins
  • Screw drivers
Pulled oven about 6 inch out from cabinet. Then remove side cover piece. Push out hinge receptacle with screwdriver. Replace with new hinge receptacle and reverse process
Was this helpful?
Thank you for voting!
Two striped out screw heads
3 of 10 people found this instruction helpful.
  • David from MCKINNEY, TX
  • Easy
  • Less than 15 mins
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
Was this helpful?
Thank you for voting!