This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$16.47
In Stock
Order within the next 11 hrs and your part ships today!
Order within the next 11 hrs and your part ships today!
Questions And Answers for ELFW7537AW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sheri
September 15, 2023
My rubber gasket has mold all the way around it. I have always kept the door open, dried the gasket when finished washing, and use a washer cleaner product regularly. How can I clean it and keep it from coming back?
For model number ELFW7537AW0
Hello Sheri, thank you for reaching out. According to the description you have provided; the mold is so stubborn it can not be cleaned. We recommend replacing the door boot seal, part number PS12731388. We hope this helps, good luck with this repair!
the spin cycle is not working properly, the clothes are still wet.
For model number ELFW7537AW0
Hello Julia, thank you for your inquiry. According to our understanding, we would recommend checking that the load is balanced and also check the drain hose for clogging. If this is not the issue, then you may need to replace the drain pump, part number PS12365827, to fix the issue. Glad to be of assistance!
I googled the problem, read the recommendation found the part and read that it was an easy fix. Took the broken part off the door and noticed the broke off piece was in the latch on the machine. Ordered the two parts, paid the $30 2-day delivery. Parts arrived and the machine was up and runnning in under 5 minutes
Remove two screws on attachment plate slide door lock plate out. Disconnect wire harness. Remove two screws on back side. Then reverse the process, done!
P.S. don't pay $32 for next working day it still took 3 days to arrive. doesn't help when your leaving in two.
Ruemove the back panel with a square drive bit. Belt removal was easy: rotate the large whelk while coaxing the belt off with hand pressure from behind. Comparing the old to new belts, the circumference difference was about 2”. Loop the new belt over the small motor wheel and start looping over the big drum wheel; it will be reluctant. Place a small smooth pry bar between the belt and wheel while rotating the big wheel using the bar to keep the belt on the wheel. Then turn the big wheel by hand a few times to assure the belt rides correctly.
