Lint filter assembly. Part has been redesigned. If you are replacing this filter you may also need to replace grille as well. Please see model diagram for correct grille.
This high limit thermostat has a limit of 260 degrees Fahrenheit. Meaning that it will cut out when the internal dryer temperature reaches 260. This thermostat cuts back in when the temperature drops ...
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
This is an authentic idler pulley, which works with dryers.
$58.10
In Stock
Questions And Answers for ELFE7637BT0
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brenda
February 15, 2024
After a regular dry cycle, I left cloths in the dryer and when I got home there was water all over the floor. I finally found the sprayer for the "instant refresh" was spraying even with the dryer turned off.
I think I got it to reset by running a cycle of "instant refresh" is there a part that needs to be changed for this to not happen again?
For model number ELFE7637BT0
Hi Brenda, thank you for reaching out. Based on our research, the issue is most probably with the inlet mist valve, part number PS8689119. You may need to replace it to fix the issue. We hope this sorts out your problem!
Removed the back panel and the exhaust hose.removed the heater element and changed the thermostat wire was melted cut damaged part of wire soldered and rapped with black electrical tap
Main problem was the bearing, replaced the belt and felt seal as well The video instruction was very helpful Was easy with basic mechanical aptitude Dryer running great now All parts from Partselect.com Have ordered from them before and would order from them again