This genuine OEM dryer door catch ensures the door closes securely and remains latched throughout operation, allowing the dryer to run safely and uninterrupted. A properly functioning door catch helps...
We understand the pain of having a faulty appliance, so let us help you get it back to its best with this essential GASKET, a genuine part made by Frigidaire itself. This critical gasket is designed f...
Restore efficient drying performance with this genuine heating element assembly for electric dryers. Designed to deliver consistent heat, it operates at 240 volts with dual power settings of 1900W and...
This genuine OEM dryer motor assembly is responsible for driving the drum and blower, allowing clothes to tumble properly while maintaining consistent airflow during operation. As a key component of t...
Struggling with your appliance? We've got your solution. Solving your problem is this genuine A02615101 OUTER DOOR GLASS from the trusted brand, Frigidaire. With high-quality and authenticity guarante...
This hinge is a replacement hardware component designed to support smooth opening and closing while maintaining proper alignment. It is commonly replaced when worn, bent, or causing the door to sag or bind.
$209.37
In Stock
Questions And Answers for EIED200QSW00
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rob
November 23, 2022
Can the water from the dryer be hosed off instead of pulling the condenser draw out each time.?
For model number EIED200QSW00
Hello Rob, thank you for reaching out. We have researched and found a Direct Drain Kit for your model. The part number is PS11703515. This kit is designed to empty water from your condenser dryer, by draining it directly into a sink. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
I’m getting an error message E60 on my dryer. Can you tell me what that indicates. Dryer runs but does not heat up
For model number EIED200QSW00
Hello Tim, Thank you for your inquiry. An E60 error code on the dryer simply indicates a heating issue. First make sure your dryer is free from lint and debris and that there is sufficient air flow and venting. Next check the blower wheel and fan for any visible damage. The next parts to check are the heater, and the temperature sensor. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.
I am looking for a thermal fuse the booklet said if dryer turns on but no heat replace fuse do you have this part?
For model number EIED200QSW00
Hello Karen and thank you for writing.
This part is discontinued for your model and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. We do carry related parts for units just like yours. For example, part number PS11700550. Good luck with your repair.
My dryer is leaking water instead of collecting at the top. Could you tell me what part needs to be replaced. It gets a heat so i know it's not the thermostat.
For model number EIED200QSW00
Hello Eric, Thank you for the question. A clothes dryer will either leak because its exhaust system is clogged or it's not venting properly. We suggest opening the cabinet and cleaning any lint and dust built up. Remove the exhaust hose and make sure there is no build up and when installed it is sitting level with no dips. Also check the vent outside to be sure no one is trying to build a nest and causing poor air flow. We hope this helps.
Was this helpful?
Thank you for voting!
MIKE
August 8, 2023
EIED200QSW00 DYRER E50 ERROR CODE
For model number EIED200QSW00
Hello Mike, thank you for reaching out. According to our research, the E50 error code indicates that there is a problem with the motor. We would recommend checking the drive motor, part number PS11700550, to fix the issue. We hope this helps!
Super easy to fix! Unscrewed some screws, removed the broken latch on the door, put new one on, and put screws back in place. Thank you Parts select! I will definitely use this company again as needed!
I ordered the part in October2020 and it is now December 17 2020, I have not received the part and if I go to my tracking number it is stuck on its way to the next facility with a date of December 7th.
