Are you having trouble with your dishwasher's water flow? Perhaps it's time to consider this replacement part ? the Frigidaire Water Inlet Valve. Made specifically for specific models of Frigidaire di...
$94.11
In Stock
Order within the next 4 hrs and your part ships today!
This gray lower dishrack is a great replacement if your current one is worn or broken. It’s built to hold dishes securely and fits easily into the bottom of your dishwasher. No tools needed—just slide...
$184.16
In Stock
Order within the next 4 hrs and your part ships today!
This pump drives the movement of water through the appliance to support circulation or drainage. Reliable water flow is essential for effective operation and performance. Replacing a failing pump can ...
$219.03
In Stock
Order within the next 4 hrs and your part ships today!
Remove front Fascia on floor, use AC sniffer find hot wires into unit. Flip circuit breaker at panel. Verify no AC, shut water valve off on Dishwasher supply. Disconnect two valve wires to solenoid. Use wrench set to find proper size and use to remove supply line. Unscrew two Phillips sheet metal screws that hold valve support bracket and remove bracket with it now being held in by water inlet valve hose to interior wall of Dishwasher. Use Tin Snips to cut off metal band securing hose to old water inlet valve. Place new valve onto inlet hose, secure with new hose clamp (you must supply) tighten hex nut on clamp till water tight. Fasten wires onto the solenoid and mount assembly support bracket to dishwasher. Now connect water supply line after wrapping threads with pipe dope tape fasten and secure nut with adjustable wrench till water tight open supply valve and look for leaks with a flash light. If no leaks, reset breaker and test run and drain. No leaks replace fascia and have a Beer great Job saved $850 min. on a new dishwasher!
