EI30EF55GSA Electrolux Range - Overview

Diagrams for EI30EF55GSA

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Temperature Sensor – Part Number: 316490000
$83.52
In Stock
Temperature Sensor
★★★★★
★★★★★
(49)
Part #316490000
The temperature sensor, also known as an oven probe, detects the temperature within the oven cavity. This temperature sensor is 9 inches in length and is a genuine OEM part. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor. Please make sure to disconnect the power to your range before starting your repair.
ELEMENT – Part Number: 5304533520
$116.36
In Stock
ELEMENT
★★★★★
★★★★★
(25)
Part #5304533520
Dual Radiant Surface Element
Radiant Element with Limiter - 1200W – Part Number: 318178110
$162.93
In Stock
Radiant Element with Limiter - 1200W
★★★★★
★★★★★
(18)
Part #318178110
The 6” radiant cooking element with limiter fits under the glass cooktop and supplies heat to the cooking area. If your element is not heating, you can test the element for continuity with a multimeter. If the element doesn’t have continuity you will need to replace the element. If it doesn’t have continuity it is suggested to check the element switch because it could be defective and need to be replaced. This element is 1200 watts and is a genuine OEM part. The manufacturer suggests making sure the cooking element is cooled before starting the repair. Please remember to disconnect the power to the appliance before starting the repair.
Oven Rack – Part Number: 316496201
$105.07
In Stock
Oven Rack
★★★★★
★★★★★
(10)
Part #316496201
This is a replacement rack for your oven. The oven rack fits into grooves on the side of the oven wall, and acts as a shelf that you can place food items on when you want to cook them in the oven. This rack is 24 inches wide and 16 inches long, and is chrome in color. Occasionally, the rack will become warped or distressed, or it may be missing from your oven. In these cases, it will need to be replaced. To replace the rack, simply slide out the old rack and replace it with the new one.
Oven Drawer Handle Screw – Part Number: 316433303
$36.34
In Stock
Oven Drawer Handle Screw
Part #316433303
Order quantity needed.
Convection Fan Blade – Part Number: 318398302
$43.07
In Stock
Convection Fan Blade
★★★★★
★★★★★
(5)
Part #318398302
This convection fan blade is designed for use with various makes and models of range and oven and is sold as an individual part. Made of metal and measuring approximately 4.75-inches in diameter, this genuine OEM fan blade works with the convection motor to circulate and distribute heat evenly throughout the oven. If your oven is not getting hot enough or the heat is not circulating properly, or if the fan blade in your oven has become warped, damaged, or chipped, it needs to be replaced immediately. To replace the fan blade, disconnect your range from the power and locate the fan assembly. With the appropriate screwdriver and wrench, remove any assembly covers and the securing nut from the blade. Once the nut is removed, install the new blade and secure it and re-install the cover.
Dual Radiant Surface Element – Part Number: 316282100
$323.72
In Stock
Dual Radiant Surface Element
★★★★★
★★★★★
(7)
Part #316282100
You can adjust the size of the burner you want to use to match your pots/pans.
Leveling Leg Assembly – Part Number: 5304509869
$17.55
In Stock
Leveling Leg Assembly
★★★★★
★★★★★
(3)
Part #5304509869
Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.
Bake Element -3000W – Part Number: 316505500
$282.40
In Stock
Bake Element -3000W
★★★★★
★★★★★
(2)
Part #316505500
Restore your oven’s baking performance with this 3000-watt bake element, located at the bottom of the oven. It fits a variety of Frigidaire, Electrolux, and Tappan models and features a unique coil design for even heat distribution. If your oven isn’t heating correctly or food is cooking unevenly, this part may need replacing. It connects with four ¼-inch push-on terminals—check your model number to ensure a proper fit.
Anti-Tip Kit – Part Number: 316112005
$35.95
In Stock
Anti-Tip Kit
★★★★★
★★★★★
(4)
Part #316112005
This kit comes with two installation screws.
Door Seal – Part Number: 316405000
$186.89
In Stock
Door Seal
★★★★★
★★★★★
(3)
Part #316405000
This oven door gasket creates a secure seal around the door to keep heat inside the oven for consistent cooking and energy efficiency. Made from high-quality, heat-resistant fiberglass with a tempered wire insert, it offers superior durability compared to standard seals. The gasket measures approximately 80 to 84 inches in length and includes 16 mounting clips for easy installation—simply remove the old seal and press the new one into place. Replacing a worn gasket helps prevent heat loss, uneven cooking, and extended preheating times.
Fan Blade Retainer Nut – Part Number: 316136600
$39.95
In Stock

Manuals & Care Guides for EI30EF55GSA

Click to download

Common Symptoms of the EI30EF55GSA

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven wouldn't operated. Error code F9
76 of 101 people found this instruction helpful.
  • Richard from Centennial, CO
  • Really Easy
  • Less than 15 mins
  • Nutdriver
I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).

Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet m etal, then 3 screws that mount the motor. Replace motor, reattach sheet metal. Plug in. Done. Ready to bake cookies.
Was this helpful?
Thank you for voting!
burned out burner
70 of 99 people found this instruction helpful.
  • Lori from Winter Haven, FL
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the differ ent sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
Was this helpful?
Thank you for voting!
oven did not heat up
73 of 130 people found this instruction helpful.
  • Tim from ASHAWAY, RI
  • Really Easy
  • 15 - 30 mins
  • Socket set
Replaced the probe because that's what this site recommended.The oven still does not heat up.
Was this helpful?
Thank you for voting!