EI24MO45IBA Electrolux Microwave - Overview

Diagrams for EI24MO45IBA

See every part. Know exactly what you need.

Parts for the EI24MO45IBA

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
SWITCH – Part Number: 5304493153
$104.82
In Stock
SWITCH
★★★★★
★★★★★
(1)
Part #5304493153
The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or closed to the electronic control board. Before making this repair, you will want to make sure to unplug your microwave and discharge the capacitor. Your microwave capacitor is able to store electricity in large quantities even after it has been unplugged. The most common reason for replacing your relay switch is if the microwave will not turn on but your timer still runs..
Read less
Turntable Motor – Part Number: 5304440021
$98.36
In Stock
Turntable Motor
★★★★★
★★★★★
(2)
Part #5304440021
This motor rotates the glass turntable in the microwave.
Wave Guide Cover – Part Number: 5304462314
$76.42
Special Order
Wave Guide Cover
★★★★★
★★★★★
(1)
Part #5304462314
This microwave waveguide cover is a protective mica panel that shields the internal components of the microwave—especially the magnetron—from moisture, grease, and food splatter during cooking. It helps prevent sparking and keeps the appliance operating safely and efficiently while still allowing microwaves to pass through to heat food. Made from heat-resistant mica material, it should be replaced if it becomes burned, cracked, or stained. Installation is simple and usually involves sliding the old cover out and securing the new one in place to restore safe operation.
Read less
TURNTABLE TRAY – Part Number: 5304529482
$130.54
On Order
Door Open Lever – Part Number: 5304485407
$75.85
In Stock
Door Open Lever
★★★★★
★★★★★
(3)
Part #5304485407
This door release lever is designed to activate the door latch mechanism, allowing the microwave door to open smoothly when the release button is pressed. It plays a key role in everyday operation, and replacement is recommended if the door becomes difficult to open or the lever is worn or damaged. Installing a new lever helps restore proper door function and reliable access to the appliance.
Door Latch Hook – Part Number: 5304441893
$60.84
In Stock
SWITCH KIT – Part Number: 5304468224
$102.57
In Stock
SWITCH KIT
Part #5304468224
Door Latch Spring – Part Number: 5304440316
$73.46
In Stock
Door Latch Spring
★★★★★
★★★★★
(1)
Part #5304440316
Sold individually.
Light Bulb – Part Number: 5304464198
$54.93
Special Order
Light Bulb
Part #5304464198
Turntable Roller Guide – Part Number: 5304467717
$146.54
In Stock
Turntable Roller Guide
Part #5304467717
This roller guide sits underneath the glass turntable tray.
MAGNETRON – Part Number: 5304521745
$280.07
In Stock
MAGNETRON
Part #5304521745
Microwave Screw – Part Number: 5304451553
$34.95
Special Order
Microwave Screw
Part #5304451553
View More

Questions And Answers for EI24MO45IBA

Ask our experts a question about this model and we'll get back to you as soon as possible!

We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sarah - For model number EI24MO45IBA
December 5, 2024
Inside right wall there is a plate of some sort and when I was wiping it down, a hole appeared! It's a paper like consistency. Is there a replacement part for this? So disappointed its paper.
Chris Boyle Profile
Hi Sarah, Thank you for your question. The part you are referring to is the waveguide cover, part number PS1993100. We hope this helps!
$76.42
Special Order
Wave Guide Cover
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the EI24MO45IBA

How this model fails, and the parts that fix it.

No heat
Fixed by
these parts
Fixing
Show All
Won’t turn on
Fixed by
these parts
Fixing
Show All
Door stuck closed
Fixed by
these parts
Fixing
Show All
Tray won’t turn
Fixed by
these parts
Fixing
Fixing
Show All
Door not closing properly
Fixed by
these parts
Fixing
Show All
Noisy
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Timer would run but the microwave won't start
91 of 149 people found this instruction helpful.
  • Tim from Chicago, IL
  • Easy
  • 30 - 60 mins
  • Screw drivers
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
Was this helpful?
Thank you for voting!
Turntable stoped working
29 of 34 people found this instruction helpful.
  • steve from New Bern, NC
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed the 3 screws to drop the lower panel and, removeed the turn table plate and ring. Then removed the 2 screws holding the motor, the 2 wires attached to the motor and removed the old motor.Replaced the new motor in the reverse order. DO NOT FORGET TO UNPLUG THE MICROWAVE FIRST.
Was this helpful?
Thank you for voting!
microwave wouldn't turn on but timer worked.
35 of 64 people found this instruction helpful.
  • Steve from Moorhead, MN
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a 12 volt battery and it was bad. Ordered a new one from Part select and got it fast . Works great .
Read less
Was this helpful?
Thank you for voting!
View More