EI24ID30QS0A Electrolux Dishwasher - Overview

Hello Roy, thank you for the great question. Measure the height of the cabinet opening from the underside of the countertop to the floor. Move the dishwasher to the front of the installation area. Adjust the leveling legs. Regardless of whether side-mount cabinet clips or top-mount cabinet clips are used to secure the unit, holes must be pre-drilled with a bit. To install the side mounting clips, install the side mounting brackets before the unit is installed into the cabinet, and insert screws into the front holes of the clips only. Use extreme caution when fixing the screws so as not to scratch dishwashers or kitchen cabinets. Carefully place the dishwasher inside the cabinet area so that it is centered in the opening. Use caution when moving the dishwasher to prevent damage to the cabinet, dishwasher, and floor. The front of the door needs to be even with the front of adjoining cabinets. Front levelers should allow 5/16" (0.88 cm) from the counter's underside to the top of the console. Check that the dishwasher is level from side to side by placing a level against the top front section of the tub. Screw the mounting brackets firmly to the cabinet using the screws provided in the installation packet. Open and close the dishwasher door slowly. Ensure that there is clearance for the console. Adjust the rear foot if a minor correction is needed until the door opens and closes freely. Adjust the leveling legs. We hope this information is useful!