EHL151FXRQ00 Whirlpool Freezer - Overview

Diagrams for EHL151FXRQ00

See every part. Know exactly what you need.

Parts for the EHL151FXRQ00

$30.40

Screw

★★★★★

(5)

Part #W11233072

This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.

Spray Paint - 12 oz. - White

Part #350930

Door Key

★★★★★

(1)

Part #WP1-26356

Refrigerator Touch Up Paint

★★★★★

(1)

Part #WP72107

$201.91

Freezer Temperature Control Thermostat

★★★★★

(1)

Part #WP4-35940-001

This part maintains the proper temperature. When the refrigerator reaches the desired temperature, this part interrupts the flow of electricity to the compressor which stops the cooling process.

$112.33

BASKET

Part #W11553315

This basket provides organized storage and easy access during appliance operation. Sturdy construction supports regular use without sagging or shifting. Replacing a damaged basket restores capacity, stability, and convenience.

$96.21

Overload

Part #WP2214067

This part provides added protection for the compressor motor because it protects against excessive current and excessive temperature use.

SOCKET

Part #2005042

$19.76

Light Bulb

Part #W10873798

$54.95

Filter Drier Tube

★★★★★

(1)

Part #W10843121

This filter dryer is for refrigerators and filters refrigerant that travels through the sealed system of the refrigerator.

$270.91

Door Gasket

Part #WP4-35260-005

Keep cold air contained with a replacement freezer door or lid gasket. A damaged seal can allow moisture inside, leading to frost, temperature changes, and longer cooling cycles. First, clean the existing gasket and cabinet edge, then check for gaps or hardened sections. Make sure the lid is aligned correctly because loose hinges can also...Read more

Read less

Inner Door Panel Rivet Kit

Part #4356703

Manuals & Care Guides for EHL151FXRQ00

Click to download

Manual

Owner's Manuals

(0.44MB)

Questions And Answers for EHL151FXRQ00

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Shawn - For model number EHL151FXRQ00

January 23, 2020

Freezer is plugged into gfi outlet, tripped gfi circuit, could not reset gfi outlet, so replaced gfi outlet , pugged freezer back in to new gfi circuit plug about 48 hours later gfi circuit had tripped again, reset gfi circuit, freezer is running fine again. But is freezer gonna trip breaker again? Or is compressor getting ready to die?

Hello Shawn, thank you for your question. It sounds like one of the compressor switches or the capacitor is causing the unit to overload. We would recommend testing/replacing the following parts. Part #: PS11742407 start, and Part #: PS11739715 overload, and Part #: PS988314 capacitor. I hope this helps.

3 people found this instruction helpful.

Was this helpful?

Kim - For model number EHL151FXRQ00

April 29, 2024

Cord that goes to the freezer lid. I need a replacement. It plugs into the top

Hello Kim, thank you for contacting us. The power cord you are looking for is part number PS3652567. If you need help placing an order, customer service is open 7 days a week!

$220.16

HARNESS

Was this helpful?

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

light switch metal was corroaded by the moisture. there was no contact so light wouldnot turn on.

7 of 10 people found this instruction helpful.

Henry from Monrovia, CA
Easy
Less than 15 mins
Pliers

pulled switch from door ,unpluged it and then plued in new switch.

Was this helpful?

Overload was open

4 of 8 people found this instruction helpful.

richard from galena, KS
A Bit Difficult
30 - 60 mins
Screw drivers

New part was similar, except contact blade was for a full 1/4", my model utilizes 1/8". So I cut the blade in half with a hacksaw, filed off the rough edges and reassemblied the connector; attached it to the compressor
Now being a retired electronic engineer; who's great idea was it to hide a klixon inside the connector?

Was this helpful?

Both outside door handles turned very beige

23 of 76 people found this instruction helpful.

Howard from Boynton Beach, FL
Easy
30 - 60 mins
Nutdriver

Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol ... Read more

Read less

Was this helpful?