This door latch, also referred to as a door strike, is designed to secure the washer door during operation, helping to prevent leaks and ensure the appliance starts properly. Made from brushed metal, ...
This door lock assembly is engineered to secure the washer door during active wash and spin cycles, ensuring safe and uninterrupted operation. Designed for compatibility with select models from Frigid...
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
This washer shock absorber mounting pin is a small but essential fastener that secures the shock absorber to the outer tub of a front-load washing machine. By holding the shock absorber firmly in plac...
Worried by a leaky or loose appliance door? Weve got just the thing for you. The Frigidaire Door Boot Gasket Seal could be the fix you need to get your appliance running smoothly again. Its not just a...
Have you been facing leaking issues with your washing machine? Our genuine and high-quality Frigidaire Bellows Spring Clamp could be the simple solution you need. Designed for your washing machine's d...
This washer pressure sensor switch monitors water levels inside the tub to help regulate filling, washing, and draining during each cycle. It supports proper washer operation by signaling when the cor...
Having a problem with your washing machine? Weve got a solution for you. Introducing the genuine Frigidaire Shock Absorber. This is more than just a partits a key ally for your Frigidaire washing mach...
This spring helps keep the rubber seal around your washer’s door in place, stopping leaks and keeping everything running smoothly. If your washer is leaking or the seal looks loose, this part might be...
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
December 20, 2019
Will not power up when power button is pushed. Digital screen will not light up. It does have power coming into the primary circuit board.
For model number EFLW417SIW0
Hi George,
Thank you for your question. If the washer will not start, there are some parts that you will need to check to see which one is causing the issue. You will need to check the door lock assembly, the door latch, the electronic control board, the knobs and the motor. We hope this helps. Thank you and have a great day!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Cindie
October 21, 2021
What gasket do i need to seal the door / window?
For model number EFLW417SIW0
Hello Cindie, thank you for your question. We have researched the model you have provided, and we would suggest the BELLOWS, part number PS11766094. We hope this helps!
The plastic rubber gasket covering the opening of the front loading washing machine is all gunked up. Can I order a replacement and if so, where?
Thank you!
For model number EFLW417SIW0
Hi Poldi, thank you for your inquiry. According to our research, the gasket you are looking for is part number PS17219743. Glad to be of help!
Water drains and then spins slowly. Never spins water from clothing.
For model number EFLW417SIW0
Hi Deborah, thank you for contacting us. Based on our understanding, the issue is with the drive belt, part number PS2349239. The drive belt connects the drive motor to the drive system in the washer to spin the basket. We would recommend checking the drive belt to fix the issue. We hope this solves your problem.
I googled the problem, read the recommendation found the part and read that it was an easy fix. Took the broken part off the door and noticed the broke off piece was in the latch on the machine. Ordered the two parts, paid the $30 2-day delivery. Parts arrived and the machine was up and runnning in under 5 minutes
Remove two screws on attachment plate slide door lock plate out. Disconnect wire harness. Remove two screws on back side. Then reverse the process, done!
P.S. don't pay $32 for next working day it still took 3 days to arrive. doesn't help when your leaving in two.
Unscrewed the two screws holding the latch and screwed on the new one. Took less than 5 minutes. The best part was that I ordered the latch on Friday and it was delivered on Saturday!
