This door latch, also referred to as a door strike, is designed to secure the washer door during operation, helping to prevent leaks and ensure the appliance starts properly. Made from brushed metal, ...
This door lock assembly is engineered to secure the washer door during active wash and spin cycles, ensuring safe and uninterrupted operation. Designed for compatibility with select models from Frigid...
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
This washer shock absorber mounting pin is a small but essential fastener that secures the shock absorber to the outer tub of a front-load washing machine. By holding the shock absorber firmly in plac...
Have you been facing leaking issues with your washing machine? Our genuine and high-quality Frigidaire Bellows Spring Clamp could be the simple solution you need. Designed for your washing machine's d...
This washer pressure sensor switch monitors water levels inside the tub to help regulate filling, washing, and draining during each cycle. It supports proper washer operation by signaling when the cor...
Having a problem with your washing machine? Weve got a solution for you. Introducing the genuine Frigidaire Shock Absorber. This is more than just a partits a key ally for your Frigidaire washing mach...
This spring helps keep the rubber seal around your washer’s door in place, stopping leaks and keeping everything running smoothly. If your washer is leaking or the seal looks loose, this part might be...
Meet the authentic Tub Suspension Spring by Frigidaire! This part is a must-have for specific Frigidaire models'and it's also compatible with certain Electrolux, White Westinghouse, and Tappan models....
$73.46
In Stock
Questions And Answers for EFLW317TIW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
June 24, 2021
How to replace bellows
For model number EFLW317TIW1
Hello Mark, Thank you for the question. We have attached a video below on how to replace the Bellow. The appliance may not be %100 the same but will have the same basic steps. We hope this helps!
Hello Mary, Thank you for your inquiry. While this model does not come with a pedestal, there is one listed by the manufacturer as an optional accessory for this model. We carry the individual parts of the pedestal model EPWD257UIW but not the complete assembly. We hope this helps you.
Was this helpful?
Thank you for voting!
Kaylina
February 7, 2025
How do I get the washer inlet replacement pieces?
For model number EFLW317TIW1
Hello Kaylina, Thank you for asking. Very sorry the Water Inlet Valve is not sold in pieces. It is only sold as part of the Dispenser Housing and Water Inlet Valve Assembly PartSelect Number PS12364916. Thank you for the inquiry, good luck with the repair!
I googled the problem, read the recommendation found the part and read that it was an easy fix. Took the broken part off the door and noticed the broke off piece was in the latch on the machine. Ordered the two parts, paid the $30 2-day delivery. Parts arrived and the machine was up and runnning in under 5 minutes
Remove two screws on attachment plate slide door lock plate out. Disconnect wire harness. Remove two screws on back side. Then reverse the process, done!
P.S. don't pay $32 for next working day it still took 3 days to arrive. doesn't help when your leaving in two.
Unscrewed the two screws holding the latch and screwed on the new one. Took less than 5 minutes. The best part was that I ordered the latch on Friday and it was delivered on Saturday!