This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jane
January 26, 2020
Need replacement transit bolts. How can i find them?
For model number EFLW317TIW0
Hi Jane, thank you for your question. Here is your shipping bolt kit: PS2367801. If you are looking to purchase this part then you can do so by either adding it to your cart and going through the check out process online, or by calling our customer service line and ordering with one of our agents. We hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Genevieve
March 3, 2023
Does the rubber gasket around the door is available ? Mine is all black and moldy ! Thanks in advance
Genevieve
For model number EFLW317TIW0
Hello Genevieve, thank you for reaching out. We researched your model and found that the door gasket, part number PS12114584, is compatible with your model. We hope this information helps!
I need the drain pump for my washer my washer wont drain the water
For model number EFLW317TIW0
Hello Kary, thank you for getting in touch. The compatible drain pump for your model is part number PS11766082. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you!
Turning on POWER the washer shows locked. It will not respond to any other commands
For model number EFLW317TIW0
Hello Ragnar, thank you for reaching out. Maybe the control lock function is activated. In order to deactivate this function, scroll to the lock option and press set. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
George
January 10, 2020
Machine will not power up. Panel does not light up at all. Has 115 volts ac at incoming power source to circuit board.
For model number EFLW317TIW0
Hi George. This may be a bad control board. Thank you for your question and good luck with your repair!
I googled the problem, read the recommendation found the part and read that it was an easy fix. Took the broken part off the door and noticed the broke off piece was in the latch on the machine. Ordered the two parts, paid the $30 2-day delivery. Parts arrived and the machine was up and runnning in under 5 minutes
Remove two screws on attachment plate slide door lock plate out. Disconnect wire harness. Remove two screws on back side. Then reverse the process, done!
P.S. don't pay $32 for next working day it still took 3 days to arrive. doesn't help when your leaving in two.
