This door latch, also referred to as a door strike, is designed to secure the washer door during operation, helping to prevent leaks and ensure the appliance starts properly. Made from brushed metal, ...
This is a door boot, also known as a door gasket or door bellows, for various models of washing machines. This door boot is used to seal the inner drum of the washing machine from the inside of the w...
This door lock assembly is engineered to secure the washer door during active wash and spin cycles, ensuring safe and uninterrupted operation. Designed for compatibility with select models from Frigid...
This OEM water inlet valve assembly with flow meter fits select Frigidaire, Electrolux, White Westinghouse, and Tappan washers. It regulates water flow for efficient operation and energy savings. Unpl...
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
This washer shock absorber mounting pin is a small but essential fastener that secures the shock absorber to the outer tub of a front-load washing machine. By holding the shock absorber firmly in plac...
This dispenser drawer assembly is designed for front-load washing machines and houses compartments for detergent, fabric softener, and bleach. It ensures that cleaning agents are released at the corre...
Have you been facing leaking issues with your washing machine? Our genuine and high-quality Frigidaire Bellows Spring Clamp could be the simple solution you need. Designed for your washing machine's d...
Restore your washer’s dispenser drawer with this replacement handle assembly. Built to fit securely and last, it makes opening and closing the drawer easy again. Installation is simple—just pull out t...
This washer pressure sensor switch monitors water levels inside the tub to help regulate filling, washing, and draining during each cycle. It supports proper washer operation by signaling when the cor...
$70.80
In Stock
Questions And Answers for EFLS627UTT2
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rob
July 31, 2023
I'm looking for the suspension bracket to connect my washer to the drawer. I miss placed it and looking for a replacement
For model number EFLS627UTT2
Hi Rob, thank you for the question. The part you are looking for is the tub suspension bracket, part number PS11766032. It attaches across the cabinet and provides a support for the tub suspension springs and shocks. We hope this helps!
My washer drawer will not shut? No idea why. This washer was purchased 3/21. I’ve never had a washer stop working this early before. What do I need to do?
For model number EFLS627UTT2
Hi Sallie, thank you for getting in touch. Inspect the drawer and the area around it for any obstructions, such as clothing, detergent residue, or foreign objects that might be preventing it from closing properly. If the issue persists, you may need to replace the dispenser drawer, part number PS12585054. We hope this solves your problem!
I googled the problem, read the recommendation found the part and read that it was an easy fix. Took the broken part off the door and noticed the broke off piece was in the latch on the machine. Ordered the two parts, paid the $30 2-day delivery. Parts arrived and the machine was up and runnning in under 5 minutes
Remove two screws on attachment plate slide door lock plate out. Disconnect wire harness. Remove two screws on back side. Then reverse the process, done!
P.S. don't pay $32 for next working day it still took 3 days to arrive. doesn't help when your leaving in two.
Unscrewed the two screws holding the latch and screwed on the new one. Took less than 5 minutes. The best part was that I ordered the latch on Friday and it was delivered on Saturday!
