This 3-way water inlet valve controls the flow of hot and cold water into the washing machine, ensuring the correct temperature and water levels for each cycle. Designed with multiple solenoids for re...
This vane kit helps direct airflow or movement within the appliance, supporting efficient circulation and balanced operation. It is commonly replaced when airflow becomes uneven or components no longer move as intended.
This valve manages the controlled delivery of water or gas required for appliance operation. By ensuring proper flow and shutoff, it supports both performance and safety and is replaced when leaks, bl...
This pump moves water or liquid through the appliance as required for washing, draining, or circulation functions. Designed for reliable flow and pressure, it is commonly replaced when drainage proble...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
February 4, 2026
machine does not always do final spin (but will when I set it to Rinse and Spin). Is there a part that I can replace?
For model number EFLS210TIW00
Hello Paul, thank you for reaching out. According to our research, a faulty door lock might be causing the issue. The vibrations from a full cycle can wiggle a worn switch loose, making the machine think the door is open and stop the spin for safety, whereas the shorter rinse and spin cycle doesn't rattle it enough to fail. Replacing it might fix the issue. The part number is PS11700517. We hope this helps!
how do i know which valve needs replacing? the issue is standing water inside after few days.
For model number EFLS210TIW00
Hello Ellen, thank you for contacting us. In order to check the water inlet valves, set your multitester to the ohms resistance scale. Place each of the meter's probes to one terminal. However, if your test produces a reading of infinity, then the solenoid is bad and the water valve should be replaced. Your model comes with 2 water inlet valves, part number PS11699876, and PS11699859. We would recommend checking both of them and replace the faulty one to fix the issue. Glad to be of assistance!
