The bake element in your oven provides the heat that you cook with. If you discover that your oven is not heating up enough, not heating at all, or heating unevenly, you might have to replace the bake...
Enhance your kitchen functionality with the Transformer Halogen Light essential for your Dacor or Samsung appliances. Designed exclusively for a variety of models including Dacor Range, Dacor Wall Ove...
Having trouble regulating the temperature on your kitchen appliances? You might need this genuine Samsung SVC-HIGH LIMIT SWITCH 220F. Crafted with precision from high-quality materials, this part is d...
Are you frustrated with your current oven rack? If you own a Samsung oven and need a replacement rack, we've got you covered with the Samsung Rack Assembly. This isn't just any part; it's a genuine Sa...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Russ
December 1, 2022
The lower element doesn't get hot. It passed continuity and both 110 legs are hot (checked the service box behind the oven). When "bake" is pressed the fan comes on as if I pressed "convection". The upper element is working.
Any ideas on what I should attempt next?
For model number ECS130
Hi Russ, thank you for reaching out. If the lower element is good and not causing the issue, then the most likely issue is with the temperature sensor, part number PS16556806. We hope this information helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
didn't know if this was going to fix it, but i ordered a bake element anyway from a very frendly and knowledgeable lady in nova scotia whom i couldn't talk into coming down here to install it for me, but when the element arrived, i removed the oven door and removed the two grates, removed 2 screws from the element in the back of the oven and pulled out the element. then hooked up the 2 wires to the new element and then had a slight problem getting the 2 screws reassembled, but got it done. pam prayed, and then baked some bread and it worked perfectly. i'm quite satisfied with one more problem solved!!! ready for the next one!!!
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
