EB5300TH Makita Leaf Blower / Vacuum - Overview

This is an OEM part sourced directly from the manufacturer. The bolt is found in a Makita jig saw. This part is made of metal, and is used to secure the clamp onto the base plate assembly. Please be aware that there are different bolts used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will r...Read moreequire an Allen wrench or hex key when replacing this item. The bolt is available as an individual replacement part.

It is a genuine OEM supplied replacement flat washer which has a few different applications depending on the tool, make sure to check appropriate diagrams for correct location and use of this hardware. Please note this part is made from high quality metal and it is sold individually.

This genuine OEM woodruff key is a small, semicircular metal piece used in various power tools to connect rotating parts, such as shafts or gears, to other components like wheels or pulleys. It prevents slippage between these parts, ensuring smooth synchronization and power transmission. With a width of 3/32 inches and a length of 5/8 inc...Read morehes, consider replacing a woodruff key if you notice misalignment or excessive movement between the connected parts. Be sure to inspect the key for signs of wear, damage, or bending. Removing the key depends on the make and model of your tool. If the key is visible, gently tap it from one side using a small hammer and a punch or drift pin. This will dislodge it from its slot. If the key is stuck or difficult to access, you may need to partially disassemble the tool to gain better access to the key. Once the key is loose, carefully pull it out using pliers. Clean the keyway and slot before installing the new key. Before making your purchase, remember that this component is sold individually.

A genuine item which is supplied directly from the original equipment manufacturer for use with Makita miter saws. It is an identical replacement for a missing or damaged pin that helps to secure the turn stopper. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware....Read more Keep in mind this high-quality item is made of durable metal and is sold individually.

This is a genuine Makita replacement part. The tapping screw is designed by the manufacturer for use in power tools such as sanders, planers, and rotary hammers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Ref...Read moreer to the parts diagram to be sure of ordering the correct part. You will require a screwdriver when replacing this item. This part is sold individually.

This tapping screw is an authentic hardware that is supplied by original tool manufacturer for use with a variety of Makita power tools. It has multiple uses depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this screw. Note this durable metal screw is sold individually.