E32AF75JPS0 Electrolux Freezer - Overview

Diagrams for E32AF75JPS0

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Air Filter – Part Number: EAFCBF
$45.61
In Stock
Air Filter
★★★★★
★★★★★
(44)
Part #EAFCBF
This manufacturer-approved air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important to change the filter every 6 months to ensure that food is kept fresh, and the humidity is controlled. This part measures about 7 inches wide and 5 inches deep. Follow installation instructions provided by the manufacturer when installing this part to ensure accurate results and further guidance. Remember to unplug the refrigerator from the power source before starting this project. The air filter may be located in different places depending on your appliance, but is usually on the inner right or left side. See your manual for exact location. Our customers rated this as a very easy repair that takes only a few minutes; just locate and remove the old air filter and insert the new one to complete the repair, which requires no tools.
Defrost Thermostat – Part Number: 297216600
$38.75
In Stock
Defrost Thermostat
★★★★★
★★★★★
(16)
Part #297216600
This authentic defrost thermostat is sourced directly from the original equipment manufacturer and is designed for use with Frigidaire freezers. It regulates the internal temperature to ensure the freezer operates within the proper range. Over time, the thermostat may develop electrical issues that lead to inconsistent performance, making replacement necessary to maintain optimal functionality. To install the new thermostat, you’ll need a screwdriver to remove the old component and secure the replacement. Be sure to consult your owner’s manual and model-specific diagrams to ensure correct installation. This high-quality part is sold individually.
Refrigerator Freezer Gasket – Part Number: 5304505782
$240.34
In Stock
Refrigerator Freezer Gasket
★★★★★
★★★★★
(19)
Part #5304505782
This refrigerator and freezer door gasket is a genuine OEM replacement part designed for select models from Frigidaire, Electrolux, Kenmore, and other affiliated brands. Measuring approximately 31.3 inches by 65.15 inches, it forms a tight, magnetic seal around the door to prevent cold air from escaping and warm air from entering. This helps maintain consistent internal temperatures, reduce energy consumption, and prevent condensation or ice buildup. Constructed from high-quality rubber with embedded magnetic strips, the gasket offers long-lasting durability and reliable performance. It replaces older part numbers including 216522370 and AP6030127. Compatibility should be confirmed using your appliance’s model number prior to installation.
Run Capacitor – Part Number: 5304464438
$58.82
In Stock
Run Capacitor
★★★★★
★★★★★
(3)
Part #5304464438
This part is attached to the compressor. It helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
Refrigerator Ice Maker Assembly – Part Number: 241798231
$229.16
In Stock
Refrigerator Ice Maker Assembly
★★★★★
★★★★★
(19)
Part #241798231
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold in to the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.
SWITCH – Part Number: 216822900
$83.50
In Stock
SWITCH
★★★★★
★★★★★
(18)
Part #216822900
This part turns the light on/off as the door opens and closes.
Water Inlet Valve – Part Number: 242252603
$92.00
In Stock
Water Inlet Valve
★★★★★
★★★★★
(11)
Part #242252603
When energized, the water inlet valve will release water from the supply line into the ice mold and the water dispenser in the refrigerator. If the ice maker is not making or dispensing ice, not dispensing water, or leaking, you may need to replace the water inlet valve. The water inlet valve is in the back section of your refrigerator and will need to be pulled out from the wall. Make sure to disconnect both the water and power supply before starting your repair.
Adjustable Leveling Foot - Black – Part Number: 216396900
$41.81
In Stock
Evaporator Fan Motor (115v) – Part Number: 297309000
$85.93
In Stock
Evaporator Fan Motor (115v)
★★★★★
★★★★★
(7)
Part #297309000
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
Hinge Mounting Hexagonal Screw – Part Number: 240578902
$32.89
In Stock
Hinge Mounting Hexagonal Screw
Part #240578902
This genuine OEM hinge mounting screw is designed for use in Frigidaire and Electrolux refrigerators, providing a secure and reliable way to fasten door hinges to the cabinet. Built with a durable hex washer head and standard threading, it helps restore proper door alignment and maintain a tight seal to prevent cold air loss. Ideal for replacing worn, stripped, or corroded hardware, this heavy-duty screw ensures long-lasting stability and dependable everyday performance.
Screw – Part Number: 218755504
$32.04
In Stock
Screw
Part #218755504
Sold individually. This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer door panel. The handle mounting shoulder screw is sold individually. For the repair, you will need a pair of pliers.
Glass Shelf Insert – Part Number: 297291300
$144.16
In Stock
Glass Shelf Insert
★★★★★
★★★★★
(6)
Part #297291300
This glass crisper cover insert is a genuine OEM replacement for Frigidaire and Electrolux refrigerators, designed to fit into the crisper drawer frame and provide a sturdy surface while helping seal in humidity to keep fruits and vegetables fresh longer. Made from high-quality tempered glass for durability, the insert measures approximately 25 inches in length, 10 inches in width, and 0.25 inches in height. Installation is quick and easy—simply place the glass into the frame—and the smooth surface makes cleaning effortless. Always verify compatibility with your specific model before purchase.

Manuals & Care Guides for E32AF75JPS0

Click to download

Common Symptoms of the E32AF75JPS0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken ice maker
255 of 345 people found this instruction helpful.
  • Juan from Miami, FL
  • Really Easy
  • 15 - 30 mins
  • Socket set
Unplugged faulty ice maker, removed two screws holding it to the refrigerator and took it out. Reversed the operation with the new ice maker and after a few minutes presto, we have ice.
Was this helpful?
Thank you for voting!
Was not filling the ice tray full.
59 of 92 people found this instruction helpful.
  • Orville from Garland, TX
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
I had put in a new ice maker and it still had the problem, (I needed the Ice maker anyway) I installed the vale and while I was at it I put a five year filter on the water line that went from the value to the Ice maker, it took less than one hours, the ice is making like it did when it was new, I could not be more please at theis time. Th anks for your Interest. God bless.
Was this helpful?
Thank you for voting!
Ice Maker stopped working
39 of 48 people found this instruction helpful.
  • Dennis from DEER LODGE, MT
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Reviewed the video on your website and followed the directions to the letter. Great video
Was this helpful?
Thank you for voting!