Models > E30MO65GSSA

E30MO65GSSA Electrolux Microwave - Overview

Sections of the E30MO65GSSA

[Viewing 4 of 4]

Manuals & Care Guides for E30MO65GSSA

Click to download
Keep searches simple, eg. "belt" or "pump".
Microwave Surface Light Bulb – Part Number: 5304461116
Microwave Surface Light Bulb
★★★★★
★★★★★
(4)
PartSelect #: PS1765541
Manufacturer #: 5304461116
This light bulb is for microwaves. Light bulb illuminates the surface below the microwave or the interior of the microwave. Because high-voltage capacitors in a microwave can retain a lethal e...
$32.79
  In Stock
SWITCH – Part Number: 5304493153
SWITCH
PartSelect #: PS8769124
Manufacturer #: 5304493153
The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or c...
$57.44
  In Stock
COVER – Part Number: 5304461165
COVER
PartSelect #: PS1765590
Manufacturer #: 5304461165
$265.29
  In Stock
Screw - 4 mm x 8 mm – Part Number: 5304451561
Screw - 4 mm x 8 mm
PartSelect #: PS1150134
Manufacturer #: 5304451561
$19.76
  In Stock
MOTOR – Part Number: 5304498736
MOTOR
PartSelect #: PS10066213
Manufacturer #: 5304498736
$112.77
  In Stock
Screw,4 mm x 12 mm – Part Number: 5304451553
Screw,4 mm x 12 mm
PartSelect #: PS1150124
Manufacturer #: 5304451553
$18.10
  Special Order
SCREW – Part Number: 5304414648
SCREW
PartSelect #: PS472037
Manufacturer #: 5304414648
$17.34
  In Stock
SPRING – Part Number: 5304440831
SPRING
PartSelect #: PS979639
Manufacturer #: 5304440831
$23.90
  Special Order
SWITCH – Part Number: 5304461111
SWITCH
PartSelect #: PS1765536
Manufacturer #: 5304461111
  No Longer Available
HOOK – Part Number: 5304461131
HOOK
PartSelect #: PS1765556
Manufacturer #: 5304461131
$140.37
  In Stock
COUPLER – Part Number: 5304469899
COUPLER
PartSelect #: PS2349857
Manufacturer #: 5304469899
$114.05
  Special Order
THERMISTOR – Part Number: 5304483929
THERMISTOR
PartSelect #: PS3504468
Manufacturer #: 5304483929
$90.80
  In Stock

Questions And Answers for E30MO65GSSA

Be the first to ask our experts a question about this model!

Common Symptoms of the E30MO65GSSA

[Viewing 2 of 2]
Won’t turn on
Fixed by
these parts
Fixing
Show All
No heat
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Timer would run but the microwave won't start
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
Parts Used:
SWITCH
  • Tim from Chicago, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
87 of 137 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microwave wouldn't turn on but timer worked.
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a 12 volt battery and it was bad. Ordered a new one from Part select and got it fast . Works great .
Parts Used:
SWITCH
  • Steve from Moorhead, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
35 of 56 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave would count down but not run
After unplugging the unit remove the control face buy removing the screws. All three door switchs are on a bracket on the left. Remove the two screws holding the bracket in place and pull out. Disconnect the wires from the three switches and test each switch indivually to determine the bad one. I used a multimeter set on ohms.Replace the bad switch with the new one and replace all the wires. Reassemble the unit and you are good to go.
Parts Used:
SWITCH
  • Betty from Kimball, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
29 of 48 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!