This is an authentic manufacturer-sourced replacement part which is specially designed for use with DeWALT pressure washers. It helps to provide an air-tight seal between connected components, please ...
This is a genuine DeWalt replacement part that has been sourced from the original manufacturer to be used with pressure washers. The clear plastic hose is used to carry detergent from the chemical tan...
This is an authentic DeWalt replacement part manufactured for use with pressure washers. The rubber nozzle holder attaches to the handle assembly or dashboard and is used to stow the nozzles. This noz...
This thermal relief valve is a genuine part produced by the original manufacturer for DeWALT pressure washers. The valve connects to the pump and protects it from overheating. If the pump gets too hot...
This item is a genuine OEM sourced replacement valve kit designed for use with Dewalt pressure washers. This kit includes three (3) inner and three (3) outer valves that fit in the pump. These valve a...
$75.11
Special Order
Questions And Answers for DXPW3625
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
This is on a dewalt pressure washer with A 8.7 12 pump and Honda motor. Removed brass housing taking really good notes of how seals were placed Into housing This pump is a triplex pump. Removed 3 brass Allen head plugs to expose the 3 checks and the other 3 checks are at the bottom of other 3 ports where the 3 pistons go in. Used a needle nose plies to remove checks..Removed seals from piston ports. I used a Oring lubricant to assemble THE NEW SEALS THAT GO IN FIRST WERE VERY VERY HARD TO INSTALL HAD TO PUSH THEM IN THEN SLOWLY WORKED AROUND THE EDGE OF SEAL SLOWLY WORKING DOWN INTO BORE OF HOUSING THE rest of parts install went easy Bolted unit up,pulled starter rope to rotate pump an motor ok so far Hooked up water started motor and cleaned items I had out to do. Hope info helps
