DW400 (Type 1) DeWALT Angle Grinder - Overview

This is a genuine replacement part sourced from the original manufacturer for use with grinders, sanders, and drills. The special terminal is commonly used to link the wire from the cord to the switch. This terminal is available as an individual replacement part, please see model diagram for associative parts.

This is an Original Manufacturer Sourced replacement Side Handle used on certain Angle Grinders and Sanders/Polishers. This part consists of a Metal Shaft and a Plastic Body. Some Power Tools are equipped with a side handle, which helps you to better control the tool while it is in operation, especially when performing heavy grinding or c...Read moreutting. To replace simply screw in the new handle into the slot in the body of the tool.

This is an original DeWALT replacement part. The ring is designed by the manufacturer for use in grinders, plate joiners, and sander/polishers. This part is made of metal, and is placed to secure components with the armature and gear housing. You may require a screwdriver and pliers when replacing this item. This product is sold individually.

This is a genuine DeWalt replacement power cord, specifically designed for use with double-insulated tools. Built for durability and safety, it features two wires and two prongs, eliminating the need for a ground wire. The cord measures 8 feet in length and uses 18-gauge wiring, offering a reliable connection and flexible reach for your p...Read moreower tool needs. It’s sold individually and is compatible with the models listed below. Installation requires careful attention: the new cord wires must be properly inserted into the wire terminals, and the cord should be routed correctly to avoid pinching when reassembling the tool’s case or plate. For best results, refer to your tool’s manual or consult a professional technician.

This is an authentic DeWALT and Black & Decker replacement part that is sourced from the original manufacturer for use with saws, grinders, jointers, nibblers, plate joiners, polishers, routers, sanders, and shears. The retaining ring attaches to the ball bearing and is made of metal. When replacing this item an allen wrench and a screwdr...Read moreiver might be required during the installation process. It will need to be replaced if it becomes bent or broken. This part is available as an individual replacement.

This is a genuine OEM replacement part, it is sold individually. This part is used to keep the brush tight against the armature so the tool will work properly. Over time when the brushes wear down and heat is created, the spring may lose its tension and will have to be replaced.

Genuine Manufacturer Sourced replacement part. This item is made out of Carbon with a Lead Wire attached. This item includes One (1) Carbon Brush per order. It is recommended to replace both Carbon Brushes when replacing one. Please note Brush Holder and Spring are Sold Separately. Carbon motor brushes are one of the most commonly replac...Read moreed power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

It is a high-quality OEM part that is specially made for Porter Cable, Black and Decker and DeWALT power tools. The receptacle is designed to safely secure and connect a wire. It is an identical replacement for a faulty or a missing part that was installed on a new unit. To ensure the correct application, refer to the appropriate diagrams...Read more of your model. Note, this high-quality receptacle is made of durable metal and is sold individually. You will need a screwdriver to take the housing apart when replacing this component.

This is a genuine OEM replacement backing flange used on grinders. This part helps to hold the grinding disk to the unit. It is made out of metal and it is sold individually. To replace it you would need a spanner wrench.