DV231AEW (XAC) Samsung Dryer - Overview

Diagrams for DV231AEW

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Thermal Fuse w/Bracket – Part Number: WP35001193
$56.05
In Stock
Thermal Fuse w/Bracket
★★★★★
★★★★★
(4)
Part #WP35001193
This part is the replacement thermal fuse for your dryer. When you order this part, you will receive the fuse itself, as well as the bracket that mounts it to the dryer. The thermal fuse is approximately 2 inches wide from end to end. It is a safety device inside the dryer that shorts out if the dryer overheats. When the fuse shorts out, the dryer will function properly. You can test your thermal fuse for continuity using a multimeter. Be sure to disconnect your dryer from the power source before you begin this repair. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Heating Element - 5300W – Part Number: DC47-00019A
$210.59
In Stock
Heater Duct Assembly w/ Thermostats – Part Number: DC97-14486A
$237.43
In Stock
Heater Duct Assembly w/ Thermostats
★★★★★
★★★★★
(1)
Part #DC97-14486A
This genuine OEM heater duct assembly in your dryer directs hot air into the drum during operation. Generally, it can be found behind the drum or at the rear of the dryer. If this assembly becomes damaged, you may encounter problems such as clothes not drying properly or drying unevenly. This kit includes the housing with the heating element coil and attached insulators.
Drum Support Roller & Axle – Part Number: DC97-16782A
$91.76
In Stock
Drum Support Roller & Axle
Part #DC97-16782A
Sold individually.
Drive Belt – Part Number: 6602-001655
$122.71
On Order
Drive Belt
Part #6602-001655
Tapping Screw – Part Number: 6002-000520
$5.95
In Stock
Tapping Screw
Part #6002-000520
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.
Idler Pulley Assembly – Part Number: DC93-00634A
$147.78
In Stock
Thermistor – Part Number: DC32-00007A
$33.67
In Stock
Thermistor
Part #DC32-00007A
Thermal Fuse – Part Number: DC47-00015A
$37.55
In Stock
Thermal Fuse
Part #DC47-00015A
This thermal cut-off fuse (part number DC47-00015A) is for dryers. Thermal cut-off fuse DC47-00015A shuts off the heat if the dryer overheats. Unplug the dryer before installing this part. Wear work gloves to protect your hands.
Moisture Sensor – Part Number: DC61-02627A
$12.30
In Stock
Moisture Sensor
Part #DC61-02627A
Retainer Clip – Part Number: DC61-01228A
$5.95
In Stock
Retainer Clip
Part #DC61-01228A
Filter Spring – Part Number: DC61-02740A
$5.95
In Stock
Filter Spring
Part #DC61-02740A

Common Symptoms of the DV231AEW

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
no heat in the dryer
56 of 84 people found this instruction helpful.
  • Walter from Lynden, WA
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Remove dryer covers and locate heater assembly. Removed heater assembly and checked visually if the heater coil is opened, I verified this with an ohm meter. Heater Continuity was OK. Next step I checked the heater sensors. Thermal fuse with bracket had no ohm meter reading between two terminals[open circuit]. Order part#35001193 "thermal fuse" with bracket from "partsSelect.com." Assemble back in reverse order. Please note that the dryer heater was filled with lint and needed a good cleaning.
Was this helpful?
Thank you for voting!
Dryer wasn’t heating
40 of 60 people found this instruction helpful.
  • Cynthia from JOHNSTOWN, NY
  • Difficult
  • More than 2 hours
  • Screw drivers
Well it went really well until the dryer was put back together as it still didn’t heat. The dryer was taken apart again. This time the thermistors &fuse was tested. Alas, the new fuse was faulty. After putting the car lid fuse back on n, the dryer worked again
Was this helpful?
Thank you for voting!
The dryer turned on but the drum did not move when you pressed start even though It started it cycles.
44 of 82 people found this instruction helpful.
  • Christopher from SUGARLOAF, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I YouTube it and there’s a step by step process on how to do it, took maybe 30 mins. If I can so can you
Was this helpful?
Thank you for voting!